pISSN 2234-7518
eISSN 2005-372X

Cited by CrossRef (102)

  1. Demet KAYA, Banu SAGLAM AYDİNATAY. Termoplastik Pekiştirme Apareylerini Temizleme Yöntemleri ve Etkileri. 2024;41:35
    https://doi.org/10.17214/gaziaot.1178820
  2. Xiaoling Liao, Fengqiong Huang, Wuya Chen, Xiaoyan Cai, Yu Lu, Zhiying Zhou. The thickness and gap width of aligners made of three types of thermoforming materials: An in-vitro study. Seminars in Orthodontics 2024
    https://doi.org/10.1053/j.sodo.2024.08.005
  3. Kazem Dalaie, Katayoun Talebi Rafsanjan, Hanieh Nojehdehian, Zahra Namazi. Physical and chemical changes of clear aligners after thermoforming and intraoral exposure. APOS 2024;14:235
    https://doi.org/10.25259/APOS_169_2023
  4. Aleksa Milovanović, Aleksandar Sedmak, Zorana Golubović, Ksenija Zelić Mihajlović, Aleksandar Žurkić, Isaak Trajković, Miloš Milošević. The effect of time on mechanical properties of biocompatible photopolymer resins used for fabrication of clear dental aligners. Journal of the Mechanical Behavior of Biomedical Materials 2021;119:104494
    https://doi.org/10.1016/j.jmbbm.2021.104494
  5. Dalal Elmoutawakkil, Nabil Hacib. Current Trends in Orthodontics. 2021.
    https://doi.org/10.5772/intechopen.100347
  6. Francesco Tamburrino, Vincenzo D’Antò, Rosaria Bucci, Giulio Alessandri-Bonetti, Sandro Barone, Armando Viviano Razionale. Mechanical Properties of Thermoplastic Polymers for Aligner Manufacturing: In Vitro Study. Dentistry Journal 2020;8:47
    https://doi.org/10.3390/dj8020047
  7. Doaa N. Hamid, Mustafa M. AL-Khatieeb. Assessment the thermoforming effect on the physical and mechanical properties of different thermoplastic orthodontic retainers: An in vitro study. 2024;13
    https://doi.org/10.4103/jos.jos_61_24
  8. Luciana Paula Benício Arcas, Kusai Baroudi, Laís Regiane Silva-Concílio, Cristiane Aparecida de Assis Claro, Marina Amaral. Effect of different fabrication methods of occlusal devices on periradicular stress distribution: A photoelastic analysis. The Journal of Prosthetic Dentistry 2023;129:651
    https://doi.org/10.1016/j.prosdent.2021.06.037
  9. Evan Hertan, Julie McCray, Brent Bankhead, Ki Beom Kim. Force profile assessment of direct-printed aligners versus thermoformed aligners and the effects of non-engaged surface patterns. Prog Orthod. 2022;23
    https://doi.org/10.1186/s40510-022-00443-2
  10. Sandrine Janine Lasance, Despina Koletsi, George Eliades, Theodore Eliades. Degree of cure of orthodontic composite attachments underneath aligners. European J Oral Sciences 2024;132
    https://doi.org/10.1111/eos.12963
  11. Amal I. Linjawi, Amal M. Abushal. Adaptational changes in clear aligner fit with time:. 2022;92:220
    https://doi.org/10.2319/042421-330.1
  12. Valeria Daniele, Ludovico Macera, Giuliana Taglieri, Loredana Spera, Giuseppe Marzo, Vincenzo Quinzi. Color Stability, Chemico-Physical and Optical Features of the Most Common PETG and PU Based Orthodontic Aligners for Clear Aligner Therapy. Polymers 2021;14:14
    https://doi.org/10.3390/polym14010014
  13. Campobasso Alessandra, Ariano Anastasia, Battista Giovanni, Posa Francesca, Migliorati Marco, Drago Sara, Lo Muzio Eleonora, Mori Giorgio. Comparison of the cytotoxicity of 3D-printed aligners using different post-curing procedures: an in vitro study. 2023;39:49
    https://doi.org/10.2478/aoj-2023-0026
  14. Harsimrat Kaur, Tsolmonbaatar Khurelbaatar, James Mah, Giseon Heo, Paul W. Major, Dan L. Romanyk. Investigating the role of aligner material and tooth position on orthodontic aligner biomechanics. J Biomed Mater Res 2023;111:194
    https://doi.org/10.1002/jbm.b.35145
  15. Elbe Peter, Monisha J, Suja Ani George. Bisphenol-A release from thermoplastic clear aligner materials: A systematic review. J Orthod 2023;50:276
    https://doi.org/10.1177/14653125231160570
  16. Aljazi H. Aldweesh, Nassr S. Al-Maflehi, Muhannad AlGhizzi, Eman AlShayea, Sahar F. Albarakati. Comparison of mechanical properties and color stability of various vacuum-formed orthodontic retainers: An in vitro study. The Saudi Dental Journal 2023;35:953
    https://doi.org/10.1016/j.sdentj.2023.09.004
  17. Eugen Bud, Mariana Pacurar , Anamaria Bud , Manuela Chibelean , Silvia Pop , Elisabeta Vasca , Alexandru Vlasa . Tri-DIMENSIONAL PRINTED CLEAR ALIGNERS VERSUS FIXED APPLIANCES – IMPLICATIONS AT THE PERIODONTAL LEVEL SYSTEMATIC REVIEW OF THE LITERATURE. RJOR 2024;16:188
    https://doi.org/10.62610/RJOR.2024.1.16.16
  18. Saniye Merve Cengiz, Merve Goymen. The effectiveness of orthodontic treatment with clear aligners in different thicknesses. Sci Rep 2025;15
    https://doi.org/10.1038/s41598-025-86345-9
  19. Fabiana Nicita, Cesare D'Amico, Vincenzo Filardi, Donatella Spadaro, Emidio Aquilio, Maura Mancini, Luca Fiorillo. Chemical–Physical Characterization of PET-G-Based Material for Orthodontic Use: Preliminary Evaluation of micro-Raman Analysis. Eur J Dent 2024;18:228
    https://doi.org/10.1055/s-0043-1764424
  20. Svetlana Alexandrovna Demyanenko, Yana Yurievna Penkova, Andrey Leonidovich Morosov. Digital technologies in orthodontics on the example of making aligners. Review article.. Russian Journal of Dentistry 2025
    https://doi.org/10.17816/dent642024
  21. Alaa T. Albilali, Bashayer H. Baras, Mohammad A. Aldosari. Evaluation of Water Sorption and Solubility and FTIR Spectroscopy of Thermoplastic Orthodontic Retainer Materials Subjected to Thermoforming and Thermocycling. Applied Sciences 2023;13:5165
    https://doi.org/10.3390/app13085165
  22. Nathália Moraes Carvalho Barreto Brandão, Raiane Machado Maia, Victor de Morais Gomes, Carolina Resende, Alberto Nogueira da Gama Antunes, Bernardo Quiroga Souki. Bonding positional accuracy of attachments and marginal adaptation of in‐house aligners – A quality improvement laboratory study. Orthod Craniofacial Res 2024;27:120
    https://doi.org/10.1111/ocr.12843
  23. Cristina Valeri, Angelo Aloisio, Stefano Mummolo, Vincenzo Quinzi, Stefano Corbella. Performance of Rigid and Soft Transfer Templates Using Viscous and Fluid Resin-Based Composites in the Attachment Bonding Process of Clear Aligners. International Journal of Dentistry 2022;2022:1
    https://doi.org/10.1155/2022/1637594
  24. Tarek M. Elshazly, Christoph Bourauel, Philippe Chavanne, Hanaa Elattar, Ludger Keilig. Numerical biomechanical finite element analysis of different trimming line designs of orthodontic aligners: An in silico study. Journal of the World Federation of Orthodontists 2024;13:65
    https://doi.org/10.1016/j.ejwf.2024.01.001
  25. Tarek M. Elshazly, Christoph Bourauel, Ahmed M. Ismail, Omar Ghoraba, Philippe Chavanne, Hanaa Elattar, Abdulaziz Alhotan. Effect of thermomechanical ageing on force transmission by orthodontic aligners made of different thermoformed materials: An experimental study. Orthod Craniofacial Res 2024;27:113
    https://doi.org/10.1111/ocr.12825
  26. Edoardo Mantovani, Simone Parrini, Emanuele Coda, Giovanni Cugliari, Nicola Scotti, Damiano Pasqualini, Andrea Deregibus, Tommaso Castroflorio. Micro computed tomography evaluation of Invisalign aligner thickness homogeneity. 2021;91:343
    https://doi.org/10.2319/040820-265.1
  27. Duygu ERGEL, Sanaz SADRY, Ufuk OK. Ortodontide Kullanılan Şeffaf Plakların Su Emilimlerinin ve Renklenmelerinin Değerlendirmesi. 2021:456
    https://doi.org/10.38079/igusabder.1010796
  28. Poom Narongdej, Mana Hassanpour, Nicolas Alterman, Frederick Rawlins-Buchanan, Ehsan Barjasteh. Advancements in Clear Aligner Fabrication: A Comprehensive Review of Direct-3D Printing Technologies. Polymers 2024;16:371
    https://doi.org/10.3390/polym16030371
  29. Stefan Abela. Digital Orthodontics. 2024.
    https://doi.org/10.1007/978-3-031-79096-6_7
  30. Anna Iliadi, Despina Koletsi, Spyridon N. Papageorgiou, Theodore Eliades. Safety Considerations for Thermoplastic-Type Appliances Used as Orthodontic Aligners or Retainers. A Systematic Review and Meta-Analysis of Clinical and In-Vitro Research. Materials 2020;13:1843
    https://doi.org/10.3390/ma13081843
  31. Angela Mirea Bellocchio, Marco Portelli, Ludovica Ciraolo, Elia Ciancio, Angela Militi, Matteo Peditto, Serena Barbera, Riccardo Nucera. Evaluation of the Clinical Variables Affecting Attachment Reproduction Accuracy during Clear Aligner Therapy. Materials 2023;16:6811
    https://doi.org/10.3390/ma16206811
  32. Nicolae Daniel Olteanu, Camelia Szuhanek, Sorana Nicoleta Rosu, Dragos Florin Chitariu, Nicolae Seghedin, Tinela Panaite, Amalia Casalean, Irina Nicoleta Zetu. An Assessment of the Mechanical Deformation Behavior of Three Different Clear Aligner Materials: A Digital Image Correlation Analysis. Applied Sciences 2024;14:7496
    https://doi.org/10.3390/app14177496
  33. Bhadrinath Srinivasan, Sridevi Padmanabhan, Sivakumar Srinivasan. Comparative evaluation of physical and mechanical properties of clear aligners – a systematic review. Evid Based Dent 2024;25:53
    https://doi.org/10.1038/s41432-023-00937-w
  34. Priyanka Selvaraj, Ramya Rajendran, K.S. Sumithra Devi, Sruthi Jeevagan, Mora Sathi Rami Reddy. Assessing biomechanical aging of aligners produced by different thermoformed machine using 3d scanner -An invivo study. IJODR 2024;10:250
    https://doi.org/10.18231/j.ijodr.2024.044
  35. Monica Macrì, Giovanna Murmura, Giuseppe Varvara, Tonino Traini, Felice Festa. Clinical Performances and Biological Features of Clear Aligners Materials in Orthodontics. Front. Mater. 2022;9
    https://doi.org/10.3389/fmats.2022.819121
  36. Nearchos C. Panayi. Directly Printed Aligner: Aligning with the Future. TurkJOrthod 2023;36:62
    https://doi.org/10.4274/TurkJOrthod.2023.2023.20
  37. Kazem Dalaie, Seyyed Mostafa Fatemi, Samin Ghaffari. Dynamic mechanical and thermal properties of clear aligners after thermoforming and aging. Prog Orthod. 2021;22
    https://doi.org/10.1186/s40510-021-00362-8
  38. Se Yeon Lee, Hoon Kim, Hyun-Joong Kim, Chooryung J. Chung, Yoon Jeong Choi, Su-Jung Kim, Jung-Yul Cha. Thermo-mechanical properties of 3D printed photocurable shape memory resin for clear aligners. Sci Rep 2022;12
    https://doi.org/10.1038/s41598-022-09831-4
  39. Cinzia Maspero, Gianluca Martino Tartaglia. 3D Printing of Clear Orthodontic Aligners: Where We Are and Where We Are Going. Materials 2020;13:5204
    https://doi.org/10.3390/ma13225204
  40. Neda Babanouri, Nazanin Ahmadi, Hamid Reza Pakshir, Shabnam Ajami, Raha Habibagahi. Influence of a bleaching agent on surface and mechanical properties of orthodontic thermoplastic retainer materials. J Orofac Orthop 2022;83:332
    https://doi.org/10.1007/s00056-021-00312-3
  41. Vincenzo Ronsivalle, Ferdinando Ruiz, Antonino Lo Giudice, Elisabetta Carli, Pietro Venezia, Gaetano Isola, Rosalia Leonardi, Stefano Mummolo. From Reverse Engineering Software to CAD-CAM Systems: How Digital Environment Has Influenced the Clinical Applications in Modern Dentistry and Orthodontics. Applied Sciences 2023;13:4986
    https://doi.org/10.3390/app13084986
  42. Rémi Ammann, Christine Tanner, Georg Schulz, Bekim Osmani, Prasad Nalabothu, Tino Töpper, Bert Müller. Three-dimensional analysis of aligner gaps and thickness distributions, using hard x-ray tomography with micrometer resolution. J. Med. Imag. 2022;9
    https://doi.org/10.1117/1.JMI.9.3.031509
  43. Luka Šimunović, Tadeja Blagec, Senka Meštrović. The Influence of Different Cleaning Protocols on the Surface Roughness of Orthodontic Retainers. Applied Sciences 2023;13:1319
    https://doi.org/10.3390/app13031319
  44. Huda M. Alkawari, Laila F. Baidas, Areen A. Alyahya, Renad A. Alotaibi, Eman I. Alshayea. Impact of simulated gastric acid on the physical and mechanical properties of vacuum-formed retainers: an in vitro study. BMC Oral Health 2025;25
    https://doi.org/10.1186/s12903-025-05548-8
  45. Gianluca M. Tartaglia, Andrea Mapelli, Cinzia Maspero, Tommaso Santaniello, Marco Serafin, Marco Farronato, Alberto Caprioglio. Direct 3D Printing of Clear Orthodontic Aligners: Current State and Future Possibilities. Materials 2021;14:1799
    https://doi.org/10.3390/ma14071799
  46. Yuri SHIMADA, Yoshifumi YOSHIDA, Ryosuke ISOGAI, Koutaro MAKI. Visualization of orthodontic forces generated by aligner-type appliances. Dent. Mater. J. 2022;41:608
    https://doi.org/10.4012/dmj.2021-330
  47. Talar Torkomian, Fernando De la Iglesia Beyme, Andreu Puigdollers Pérez. 3D-Printed Clear Aligners: An Emerging Alternative to the Conventional Thermoformed Aligners? – A Systematic Review. Journal of Dentistry 2025:105616
    https://doi.org/10.1016/j.jdent.2025.105616
  48. Sumithra Devi, Ramya Rajendran, Priyanka Selvaraj, Sruthi Jeevagan, Mora Sathi Rami Reddy. A scanning electron microscope evaluation of surface roughness of different clear aligners – A comparative in-Vitro study. IJODR 2024;10:177
    https://doi.org/10.18231/j.ijodr.2024.032
  49. Isabella Pratto, Mauro Carlos Agner Busato, Paulo Rodrigo Stival Bittencourt. Thermal and mechanical characterization of thermoplastic orthodontic aligners discs after molding process. Journal of the Mechanical Behavior of Biomedical Materials 2022;126:104991
    https://doi.org/10.1016/j.jmbbm.2021.104991
  50. Madhanraj Selvaraj, Kaja Mohaideen, Karthik Sennimalai, Greeshma Shantharam Gothankar, Garima Arora. Effect of oral environment on contemporary orthodontic materials and its clinical implications. 2023;12
    https://doi.org/10.4103/jos.jos_73_22
  51. Natnicha Pariyatdulapak, Pornkiat Churnjitapirom, Toemsak Srikhirin, Nita Viwattanatipa. Bond strength of orthodontic buttons on clear aligner materials. Orthodontic Waves 2021;80:224
    https://doi.org/10.1080/13440241.2021.1972243
  52. Ashwath S. Nayak, Kiran Kumar H C. A comparative study on tensile strength of various thermoplastic polymers sheets following thermoforming on a pre-treatment and post-treatment maxillary model of a patient: an in vitro study. Clin Oral Invest 2024;28
    https://doi.org/10.1007/s00784-024-05640-3
  53. Byung-Min Kang, Sung-Kwon Choi. Effects of thermoplastic appliance fabrication on the dimensional stability of 3D printed dental models. kjdm 2020;47:105
    https://doi.org/10.14815/kjdm.2020.47.2.105
  54. Yuqing Zhang, Xiaozhuang Jin, Fabio Savoldi, Jianmin Han, Ray Kai Leung Su, Alex Fok, Jiang Chen, James Kit-Hon Tsoi. Validation of a double-semicircular notched configuration for mechanical testing of orthodontic thermoplastic aligner materials. Journal of the Mechanical Behavior of Biomedical Materials 2024;155:106543
    https://doi.org/10.1016/j.jmbbm.2024.106543
  55. Man‐Hin Kwok, Betina Porto, Shadi Mohebi, Lei Zhu, Mark Hans. Physical and chemical properties of five different clear thermoplastic materials. J of Applied Polymer Sci 2022;139
    https://doi.org/10.1002/app.51957
  56. Zi-Xun Chen, Ze-Yong Zhao, Peng Lu, Xiang-Xin Xiao, Shuang He, Cong Deng, Yu-Zhong Wang. Novel macromolecular flame retardant derived from sulfonated naphthalene monomer for simultaneous fire safety and high performance of polycarbonate. Polymer Degradation and Stability 2023;214:110388
    https://doi.org/10.1016/j.polymdegradstab.2023.110388
  57. Abirami Rajasekaran, Prabhat Kumar Chaudhari. Integrated manufacturing of direct 3D-printed clear aligners. Front. Dent. Med 2023;3
    https://doi.org/10.3389/fdmed.2022.1089627
  58. Chenyang Niu, Dongwen Li, Yujia Zhang, Yunkai Wang, Shangbo Ning, Gang Zhao, Zhihui Ye, Yu Kong, Donghong Yang. Prospects for 3D-printing of clear aligners—a narrative review. Front. Mater. 2024;11
    https://doi.org/10.3389/fmats.2024.1438660
  59. Jiawei Li, Jiarui Si, Chaoran Xue, Hui Xu. Seeking orderness out of the orderless movements: an up-to-date review of the biomechanics in clear aligners. Prog Orthod. 2024;25
    https://doi.org/10.1186/s40510-024-00543-1
  60. Omar Ghoraba, Christoph Bourauel, Mostafa Aldesoki, Lamia Singer, Ahmed M. Ismail, Hanaa Elattar, Abdulaziz Alhotan, Tarek M. Elshazly. Effect of the Height of a 3D-Printed Model on the Force Transmission and Thickness of Thermoformed Orthodontic Aligners. Materials 2024;17:3019
    https://doi.org/10.3390/ma17123019
  61. Stefan Abela. Aligner Systems in Invisible Orthodontics. 2024.
    https://doi.org/10.1007/978-3-031-49204-4_20
  62. F. Elkholy, S. Schmidt, M. Amirkhani, F. Schmidt, B. G. Lapatki. Mechanical Characterization of Thermoplastic Aligner Materials: Recommendations for Test Parameter Standardization. Journal of Healthcare Engineering 2019;2019:1
    https://doi.org/10.1155/2019/8074827
  63. Tingwu Su, Hongqi Zhang, Ting Kang, Mengqi Zhou, Jie Han, Nan Ning, Hai Lin, Xuepeng Chen, Qianming Chen. Application progress of three-dimensional printing technology in orthodontics. 2022;8:31
    https://doi.org/10.4103/digm.digm_36_22
  64. Allahyar Geramy, Fatemeh Safari. Effect of clear aligner type on maxillary full-arch intrusion: 3D analysis using finite element method. BMC Oral Health 2024;24
    https://doi.org/10.1186/s12903-024-03984-6
  65. Nicolae Daniel Olteanu, Ionut Taraboanta, Tinela Panaite, Carina Balcos, Sorana Nicoleta Rosu, Raluca Maria Vieriu, Stefania Dinu, Irina Nicoleta Zetu. Color Stability of Various Orthodontic Clear Aligner Systems after Submersion in Different Staining Beverages. Materials 2024;17:4009
    https://doi.org/10.3390/ma17164009
  66. . .
    https://doi.org/
  67. Liliana Porojan, Flavia Roxana Toma, Mihaela Ionela Bîrdeanu, Roxana Diana Vasiliu, Anamaria Matichescu. Topographical and Optical Characteristics of Thermoplastic Dental Appliances Materials Related to Water Sorption. JFB 2023;14:190
    https://doi.org/10.3390/jfb14040190
  68. Sandro Barone, Paolo Neri, Alessandro Paoli, Armando V. Razionale, Francesco Tamburrino. Development of a DLP 3D printer for orthodontic applications. Procedia Manufacturing 2019;38:1017
    https://doi.org/10.1016/j.promfg.2020.01.187
  69. Shenglin Wu, Jinbin Zeng, Haoxin Li, Chongyang Han, Weibin Wu, Wenyi Zeng, Luxin Tang. A Review on the Full Chain Application of 3D Printing Technology in Precision Medicine. Processes 2023;11:1736
    https://doi.org/10.3390/pr11061736
  70. Valeria Daniele, Ludovico Macera, Giuliana Taglieri, Alessandra Di Giambattista, Giuseppe Spagnoli, Alessandra Massaria, Massimo Messori, Enrico Quagliarini, Gianluca Chiappini, Vincenzo Campanella, Stefano Mummolo, Enrico Marchetti, Giuseppe Marzo, Vincenzo Quinzi. Thermoplastic Disks Used for Commercial Orthodontic Aligners: Complete Physicochemical and Mechanical Characterization. Materials 2020;13:2386
    https://doi.org/10.3390/ma13102386
  71. Madina Sharif, Christoph Bourauel, Ahmed Ghoneima, Jörg Schwarze, Abdulaziz Alhotan, Tarek M. Elshazly. Force system of 3D-printed orthodontic aligners made of shape memory polymers: an in vitro study . Virtual and Physical Prototyping 2024;19
    https://doi.org/10.1080/17452759.2024.2361857
  72. Aya Matsuda, Haruhisa Nakano, Yu Kataoka, Koutaro Maki. Evaluation of mechanical tests conducted before and after thermoforming of aligners. Showa Univ J Med Sci 2023;35:121
    https://doi.org/10.15369/sujms.35.121
  73. Francesca Cremonini, Margherita Vianello, Anna Bianchi, Luca Lombardo. A Spectrophotometry Evaluation of Clear Aligners Transparency: Comparison of 3D-Printers and Thermoforming Disks in Different Combinations. Applied Sciences 2022;12:11964
    https://doi.org/10.3390/app122311964
  74. Alaa T. Albilali, Bashayer H. Baras, Mohammad A. Aldosari. Evaluation of Mechanical Properties of Different Thermoplastic Orthodontic Retainer Materials after Thermoforming and Thermocycling. Polymers 2023;15:1610
    https://doi.org/10.3390/polym15071610
  75. Tarek M. Elshazly, Christoph Bourauel, Mostafa Aldesoki, Ahmed Ghoneima, Moosa Abuzayda, Wael Talaat, Sameh Talaat, Ludger Keilig. Computer-aided finite element model for biomechanical analysis of orthodontic aligners. Clin Oral Invest 2022;27:115
    https://doi.org/10.1007/s00784-022-04692-7
  76. Tarek M. Elshazly, Ludger Keilig, Diva Nang, Bijan Golkhani, Anna Weber, Hanaa Elattar, Sameh Talaat, Christoph Bourauel. Effect of thermomechanical aging on force system of orthodontic aligners made of different thermoformed materials. J Orofac Orthop 2024
    https://doi.org/10.1007/s00056-024-00527-0
  77. Tarek M. Elshazly, Ludger Keilig, Yasmine Alkabani, Ahmed Ghoneima, Moosa Abuzayda, Wael Talaat, Sameh Talaat, Christoph P. Bourauel. Potential Application of 4D Technology in Fabrication of Orthodontic Aligners. Front. Mater. 2022;8
    https://doi.org/10.3389/fmats.2021.794536
  78. So Yeon Park, Sung-Hwan Choi, Hyung-Seog Yu, Su-Jung Kim, Hoon Kim, Ki Beom Kim, Jung-Yul Cha. Comparison of translucency, thickness, and gap width of thermoformed and 3D-printed clear aligners using micro-CT and spectrophotometer. Sci Rep 2023;13
    https://doi.org/10.1038/s41598-023-36851-5
  79. Leyona Pushpa Femina I., Chandrashekar B.S., Arun A.V, Aravind S. Raju, Ramesh Kumar P.C., Balamohan Shetty. Effects of Carbonated Drinks on Mechanical Properties of Three Types of Thermoplastic Aligner Materials: An In vitro Study. J Indian Orthod Soc 2020;54:115
    https://doi.org/10.1177/0301574219892421
  80. Biao Xiang, Xingxing Wang, Gang Wu, Yichen Xu, Menghan Wang, Yanjing Yang, Qingyu Wang. The force effects of two types of polyethylene terephthalate glyc-olmodified clear aligners immersed in artificial saliva. Sci Rep 2021;11
    https://doi.org/10.1038/s41598-021-89425-8
  81. Tonya Spangler, Rami Ammoun, Caroline K. Carrico, Sompop Bencharit, Eser Tüfekçi. The effect of crowding on the accuracy of 3-dimensional printing. American Journal of Orthodontics and Dentofacial Orthopedics 2023;164:879
    https://doi.org/10.1016/j.ajodo.2023.08.005
  82. Manjiri Bhate, Shweta Nagesh. Assessment of the Effect of Thermoforming Process and Simulated Aging on the Mechanical Properties of Clear Aligner Material. 2024
    https://doi.org/10.7759/cureus.64933
  83. Niccolò Cenzato, Giada Di Iasio, Carmen Martìn Carreras-Presas, Alberto Caprioglio, Massimo Del Fabbro. Materials for Clear Aligners—A Comprehensive Exploration of Characteristics and Innovations: A Scoping Review. Applied Sciences 2024;14:6533
    https://doi.org/10.3390/app14156533
  84. Yashodhan M. Bichu, Abdulraheem Alwafi, Xiaomo Liu, James Andrews, Björn Ludwig, Aditi Y. Bichu, Bingshuang Zou. Advances in orthodontic clear aligner materials. Bioactive Materials 2023;22:384
    https://doi.org/10.1016/j.bioactmat.2022.10.006
  85. Islam Atta, Christoph Bourauel, Yasmine Alkabani, Nesreen Mohamed, Hoon Kim, Abdulaziz Alhotan, Ahmed Ghoneima, Tarek Elshazly. Physiochemical and mechanical characterisation of orthodontic 3D printed aligner material made of shape memory polymers (4D aligner material). Journal of the Mechanical Behavior of Biomedical Materials 2024;150:106337
    https://doi.org/10.1016/j.jmbbm.2023.106337
  86. Rosaria Bucci, Roberto Rongo, Carmine Levatè, Ambrosina Michelotti, Sandro Barone, Armando Viviano Razionale, Vincenzo D’Antò. Thickness of orthodontic clear aligners after thermoforming and after 10 days of intraoral exposure: a prospective clinical study. Prog Orthod. 2019;20
    https://doi.org/10.1186/s40510-019-0289-6
  87. Tarek M. Elshazly, Diva Nang, Bijan Golkhani, Hanaa Elattar, Ludger Keilig, Christoph Bourauel. Effect of thermomechanical aging of orthodontic aligners on force and torque generation: An in vitro study. Journal of the Mechanical Behavior of Biomedical Materials 2023;143:105911
    https://doi.org/10.1016/j.jmbbm.2023.105911
  88. Abraham McKay, Julie McCray, Brent Bankhead, Michael M. Lee, Gabriel Miranda, Samar M. Adel, Ki Beom Kim. Forces and moments generated during extrusion of a maxillary central incisor with clear aligners: an in vitro study. BMC Oral Health 2023;23
    https://doi.org/10.1186/s12903-023-03136-2
  89. Liliana Porojan, Flavia Roxana Toma, Mihaela Ionela Gherban, Roxana Diana Vasiliu, Anamaria Matichescu. Surface Topography of Thermoplastic Appliance Materials Related to Sorption and Solubility in Artificial Saliva. Biomimetics 2024;9:379
    https://doi.org/10.3390/biomimetics9070379
  90. Mario Palone, Mattia Longo, Niki Arveda, Michele Nacucchi, Fabio De Pascalis, Giorgio Alfredo Spedicato, Giuseppe Siciliani, Luca Lombardo. Micro-computed tomography evaluation of general trends in aligner thickness and gap width after thermoforming procedures involving six commercial clear aligners: Anin vitrostudy. Korean J Orthod 2021;51:135
    https://doi.org/10.4041/kjod.2021.51.2.135
  91. Carrol Jin, Andrew R. Gray, Paul A. Brunton, Mauro Farella, Li Mei. Effect of carbamide peroxide on biomechanical properties of vacuum-formed retainers: A split-mouth randomized controlled trial. Journal of Dentistry 2024;143:104902
    https://doi.org/10.1016/j.jdent.2024.104902
  92. Claudia Barile, Claudia Cianci, Vimalathithan Paramsamy Kannan, Giovanni Pappalettera, Carmine Pappalettere, Caterina Casavola, Carmela Suriano, Domenico Ciavarella. Thermoplastic clear dental aligners under cyclic compression loading: A mechanical performance analysis using acoustic emission technique. Journal of the Mechanical Behavior of Biomedical Materials 2024;152:106451
    https://doi.org/10.1016/j.jmbbm.2024.106451
  93. Tinela Panaite, Carmen Savin, Nicolae Daniel Olteanu, Nikolaos Karvelas, Cristian Romanec, Raluca-Maria Vieriu, Carina Balcos, Madalina Simona Baltatu, Marcelin Benchea, Dragos Achitei, Irina Zetu. Heat Treatment’s Vital Role: Elevating Orthodontic Mini-Implants for Superior Performance and Longevity—Pilot Study. Dentistry Journal 2024;12:103
    https://doi.org/10.3390/dj12040103
  94. Nic Shirey, Gustavo Mendonca, Christian Groth, Hera Kim-Berman. Comparison of mechanical properties of 3-dimensional printed and thermoformed orthodontic aligners. American Journal of Orthodontics and Dentofacial Orthopedics 2023;163:720
    https://doi.org/10.1016/j.ajodo.2022.12.008
  95. Luka Šimunović, Sara Čekalović Agović, Antun Jakob Marić, Ivana Bačić, Eva Klarić, Flavio Uribe, Senka Meštrović. Color and Chemical Stability of 3D-Printed and Thermoformed Polyurethane-Based Aligners. Polymers 2024;16:1067
    https://doi.org/10.3390/polym16081067
  96. Prashant Jindal, Mamta Juneja, Francesco Luke Siena, Divya Bajaj, Philip Breedon. Mechanical and geometric properties of thermoformed and 3D printed clear dental aligners. American Journal of Orthodontics and Dentofacial Orthopedics 2019;156:694
    https://doi.org/10.1016/j.ajodo.2019.05.012
  97. Bijan Golkhani, Anna Weber, Ludger Keilig, Susanne Reimann, Christoph Bourauel. Variation of the modulus of elasticity of aligner foil sheet materials due to thermoforming. J Orofac Orthop 2022;83:233
    https://doi.org/10.1007/s00056-021-00327-w
  98. Nearchos Panayi, Jung-Yeol Cha, Ki Beom Kim. 3D Printed Aligners: Material Science, Workflow and Clinical Applications. Seminars in Orthodontics 2023;29:25
    https://doi.org/10.1053/j.sodo.2022.12.007
  99. Edoardo Staderini, Giuseppe Chiusolo, Federica Guglielmi, Massimiliano Papi, Giordano Perini, Michele Tepedino, Patrizia Gallenzi. Effects of Thermoforming on the Mechanical, Optical, Chemical, and Morphological Properties of PET-G: In Vitro Study. Polymers 2024;16:203
    https://doi.org/10.3390/polym16020203
  100. Theerasak Nakornnoi, Patamaporn Bunjerdjin, Peerapong Santiwong, Kawin Sipiyaruk, Siew Peng Neoh, Rochaya Chintavalakorn, Weihao Yuan. The Influence of Thickness on the Mechanical Behaviors of 3D Printing Resins for Orthodontic Retainers. International Journal of Biomaterials 2024;2024
    https://doi.org/10.1155/2024/7398478
  101. Hoang Viet, Tran Hung Lam, Nguyen Ngoc Phuc, Nguyen Ngoc Lenh, Dang Thi Nhu Thao. Class II Correction and Crowding Treatment Using In-House Direct Printed Clear Aligners: A Literature Review and Case Report. 2024
    https://doi.org/10.7759/cureus.65024
  102. Aseel Alhendi, Rita Khounganian, Abdulazez Almudhi. Cytotoxicity assessment of different clear aligner systems: An in vitro study . 2022;92:655
    https://doi.org/10.2319/121621-919.1
© The Korean Association of Orthodontists. / Powered by INFOrang Co., Ltd