Korean J Orthod 2022; 52(1): 42-52 https://doi.org/10.4041/kjod.2022.52.1.42
First Published Date January 25, 2022, Publication Date January 25, 2022
Copyright © The Korean Association of Orthodontists.
Wonkyeong Baika , Sung-Hwan Choib, Jung-Yul Chab, Hyung-Seog Yub, Kee-Joon Leeb
aDepartment of Orthodontics, Yonsei University College of Dentistry, Seoul, Korea
bDepartment of Orthodontics, Institute of Craniofacial Deformity, Yonsei University College of Dentistry, Seoul, Korea
Correspondence to:Kee-Joon Lee.
Professor, Department of Orthodontics, Institute of Craniofacial Deformity, Yonsei University College of Dentistry, 50-1 Yonsei-ro, Seodaemun-gu, Seoul 03722, Korea.
Tel +82-2-2228-3105 e-mail orthojn@yuhs.ac
Objective: This study compared soft tissue changes after extraction of the four premolars followed by maximum retraction of the anterior teeth according to the type of anterior teeth movement: tipping and translation. Methods: Patients who had undergone orthodontic treatment involving the extraction of four premolars were retrospectively selected and divided into either the tipping (n = 27) or translation (n = 26) groups based on the retraction of the incisor root apex and the axis changes of the incisors during the treatment period. Lateral pre- and post-treatment cephalograms were analyzed. Results: There were no significant differences between the tipping and translation groups before treatment. The retraction amounts of the root apex of the upper and lower incisors in the tipping group were 0.33 and 0.26 mm, respectively, and 5.02 and 5.31 mm, respectively, in the translation group (p < 0.001). The posterior movements of soft tissue points A and B in the tipping group were 0.61 and 1.25 mm, respectively, and 1.10 and 3.25 mm, respectively, in the translation group (p < 0.01). The mentolabial sulcus angle increased by 5.89° in the tipping group, whereas it decreased by 8.13° in the translation group (p < 0.001). Conclusions: An increased amount of retraction of the incisor root apex led to the increased posterior movement of soft tissue points A and B, and this appeared more distinct in cases involving the lower incisor and lower lip.
Keywords: Tooth movement, Soft tissue, Tipping, Translation
Esthetic improvement is one of the primary goals of orthodontic treatment. Esthetic aspects refer to the alignment of the teeth and the improvement of the facial soft tissue profile. Therefore, orthodontists prescribe force systems to move teeth, expecting that there will be corresponding soft tissue changes in response to the movement of the underlying hard tissue.1 For this reason, predicting these hard tissue-related overlying soft tissue changes is an essential consideration in treatment planning.
Retraction of the anterior teeth following premolar extraction causes changes in the anterior soft tissue profile. Previous studies have evaluated the relationship between retraction and soft tissue changes, with a particular interest in lip position.2,3 Caplan and Shivapuja4 reported that in adult patients with bimaxillary protrusions, the ratios of maxillary anterior teeth retraction to upper lip retraction and mandibular anterior teeth retraction to lower lip retraction were 1.75:1 and 1.2:1, respectively. Hayashida et al.1 reported that horizontal changes of the upper and lower lips were mostly correlated with the retraction of the upper incisor’s cervical point and the upper incisor’s tip, respectively. Other studies have found no definite correlation between changes in dentition and changes in soft tissue.5,6
Nevertheless, previous studies have focused on the tipping type of anterior tooth movement due to the known limitation regarding tooth movement against the alveolar wall. In contrast, the emergence of skeletal anchorage systems, such as miniscrews, made it possible to achieve significant anterior teeth retraction.7-9 Moreover, proper mechanics combined with miniscrews have enabled tooth movement close to bodily translations and even root movement of the incisors.10,11 However, to our knowledge, few studies have evaluated soft tissue changes according to the retraction of the incisor root apex.
This study aimed to compare the changes in hard and soft tissues after extraction of the four premolars followed by maximum retraction of the anterior teeth, depending on the type of anterior teeth movement, tipping, and translation. Our null hypothesis was that there would be no differences between the two groups regarding changes to the hard and soft tissues during treatment.
Patients presenting with lip protrusion who had undergone orthodontic treatment with extraction of four premolars followed by retraction of the anterior teeth at the Department of Orthodontics, Yonsei University Dental Hospital, Seoul, Korea, were retrospectively evaluated in this study.
The inclusion criteria were as follows: patients at cervical vertebrae maturation index (CVMI) stage 6 (cessation of growth), an initial lip protrusion with more than 0.5 standard deviations above the average value of lip position relative to Ricketts’ E-line,12 extraction of four premolars (one tooth per quadrant), > 5 mm retraction of the upper and lower incisor tips regardless of the horizontal skeletal pattern or amount of initial crowding, and the presence of pre- and post-treatment lateral cephalograms. The exclusion criteria were > 2° changes in the mandibular plane angle (Sn-GoMe) during treatment and severe craniofacial deformity.
The subjects that satisfied the inclusion and exclusion criteria were further divided into two subgroups: the tipping group with < 1 mm retraction of the upper and lower incisor root apex and more than 10° decrease in the upper and lower incisor axis (U1 to SN angle/incisor mandibular plane angle [IMPA]), and the translation group with > 3 mm retraction of the upper and lower incisor root apex and < 10° decrease in the upper and lower incisor axis. Group 1 (n = 27) contained six male and 21 female subjects, mean age of 24.89 ± 7.36 years at pre-treatment (minimum: 17 years, 8 months, maximum: 45 years, 4 months), and an average treatment time of 27.44 ± 5.46 months. Group 2 (n = 26) contained eight male and 18 female subjects, mean age of 23.92 ± 4.79 years at pre-treatment (minimum: 18 years, 3 months, maximum: 35 years, 1 month), and an average treatment time of 31.62 ± 9.33 months (Table 1).
Table 1 . Demographic features of the subjects
Variable | Tipping group (n = 27) | Translation group (n = 26) | |
---|---|---|---|
Sex (male/female) | 6/21 | 8/18 | 0.480* |
Mean age (yr) | 24.89 ± 7.36 | 23.92 ± 4.79 | 0.580† |
Range of age | 17Y 8M–45Y 4M | 18Y 3M–35Y 1M | |
Treatment duration (mo) | 27.44 ± 5.46 | 31.62 ± 9.33 | 0.051† |
Values are presented as number only or mean ± standard deviation.
Y, year; M, month.
*χ2 test was performed.
†Independent
All patients were treated with pre-adjusted 0.018-inch slot edgewise brackets in the Roth prescription (Tomy, Tokyo, Japan). After the initial leveling and alignment, miniscrews were placed between the maxillary and mandibular second premolars and first molars for anchorage reinforcement. Then, 0.016 × 0.022-inch stainless steel rectangular archwires were placed on both arches. In Group 2 (the translation group), an additional 10° labial crown torque on the incisor area was added to the archwires if needed. Approximately 150 cN of retraction force was provided by placing elastic chains (Ormco, Glendora, CA, USA), replaced at 4-week interval until the space was closed.
This study conformed to the tenets of the Declaration of Helsinki and was approved by the Institutional Review Board of Yonsei Dental Hospital (IRB number: 2-2018-0008).
Lateral cephalograms were taken using a Cranex 3+ (Soredex, Helsinki, Finland) with a centric occlusion in the natural head position before (T1) and after (T2) treatment. Cephalometric tracing was digitized using the V-ceph program (Osstem Inc., Seoul, Korea). The horizontal reference plane (HRP) was set on the sella and oriented 7° below the sella-nasion line. The vertical reference plane (VRP) was set to the plane that passed the sella and was perpendicular to the HRP. The center of resistance of the upper and lower incisors was estimated to be one-third of the distance from the alveolar crest to the root apex in a lateral cephalogram. Cephalometric landmarks, reference planes, and measurements are shown in Table 2, Figures 1 and 2.
Table 2 . Definitions of cephalometric reference planes and measurements
Reference planes and measurements | Definitions |
---|---|
Horizontal reference plane (HRP) | Oriented 7° below the sella-nasion line and passing through sella |
Vertical reference plane (VRP) | Perpendicular to the HRP and passing through sella |
VRP-U1e | Perpendicular distance from the VRP to upper central incisor (U1) edge |
VRP-U1c | Perpendicular distance from the VRP to center of resistance of the U1 |
VRP-U1a | Perpendicular distance from the VRP to root apex of the U1 |
VRP-L1e | Perpendicular distance from the VRP to lower central incisor (L1) edge |
VRP-L1c | Perpendicular distance from the VRP to center of resistance of the L1 |
VRP-L1a | Perpendicular distance from the VRP to root apex of the L1 |
HRP-U1e | Perpendicular distance from the HRP to U1 edge |
HRP-U1c | Perpendicular distance from the HRP to center of resistance of the U1 |
HRP-U1a | Perpendicular distance from the HRP to root apex of the U1 |
HRP-L1e | Perpendicular distance from the HRP to L1 edge |
HRP-L1c | Perpendicular distance from the HRP to center of resistance of the L1 |
HRP-L1a | Perpendicular distance from the HRP to root apex of the L1 |
VRP-A | Perpendicular distance from the VRP to A point |
VRP-B | Perpendicular distance from the VRP to B point |
VRP-Pog | Perpendicular distance from the VRP to pogonion |
HRP-A | Perpendicular distance from the HRP to A point |
HRP-B | Perpendicular distance from the HRP to B point |
HRP-Pog | Perpendicular distance from the HRP to pogonion |
VRP-Sn | Perpendicular distance from the VRP to subnasale |
VRP-A’ | Perpendicular distance from the VRP to soft tissue point A |
VRP-Ls | Perpendicular distance from the VRP to labrale superioris |
VRP-ULa | Perpendicular distance from the VRP to the most anterior point of upper lip |
VRP-Stms | Perpendicular distance from the VRP to stomion superioris |
VRP-Stmi | Perpendicular distance from the VRP to stomion inferioris |
VRP-LLa | Perpendicular distance from the VRP to the most anterior point of lower lip |
VRP-Li | Perpendicular distance from the VRP to labrale inferioris |
VRP-B’ | Perpendicular distance from the VRP to soft tissue point B |
VRP-Pog’ | Perpendicular distance from the VRP to soft tissue pogonion |
HRP-Sn | Perpendicular distance from the HRP to subnasale |
HRP-A’ | Perpendicular distance from the HRP to soft tissue point A |
HRP-Ls | Perpendicular distance from the HRP to labrale superioris |
HRP-ULa | Perpendicular distance from the HRP to the most anterior point of upper lip |
HRP-Stms | Perpendicular distance from the HRP to stomion superioris |
HRP-Stmi | Perpendicular distance from the HRP to stomion inferioris |
HRP-LLa | Perpendicular distance from the HRP to the most anterior point of lower lip |
HRP-Li | Perpendicular distance from the HRP to labrale inferioris |
HRP-B’ | Perpendicular distance from the HRP to soft tissue point B |
HRP-Pog’ | Perpendicular distance from the HRP to soft tissue pogonion |
All lateral cephalometric tracings and measurements were performed by the same investigator. One week after the first tracing, 10 samples were randomly selected and retraced. The intra-class correlation coefficients of each variable were ≥ 0.93, showing a high degree of reliability.
All statistical analyses were performed using IBM SPSS Statistics software for Windows, version 20.0 (IBM Corp., Armonk, NY, USA). Based on a preliminary study, a minimum sample size of 26 per group was required (G*power 3, Dusseldorf, Germany) at a significance level of
There were no significant differences in demographic features of the subjects between the two groups, including sex, age, and treatment duration (Table 1). There were no differences in the pre-treatment skeletal and soft tissue variables between the tipping and translation groups (Table 3). However, there were significant differences in some pre-treatment dental variables, such as the U1 to SN and interincisal angle (
Table 3 . Comparison of pre-treatment cephalometric variables between tipping and translation groups
Variable | Tipping group (n = 27) | Translation group (n = 26) | |
---|---|---|---|
SNA (°) | 81.42 ± 3.49 | 81.25 ± 3.38 | 0.861 |
SNB (°) | 77.46 ± 3.55 | 77.21 ± 4.02 | 0.807 |
ANB difference (°) | 3.95 ± 2.19 | 4.04 ± 2.34 | 0.886 |
Wits (mm) | −0.86 ± 3.00 | −1.47 ± 3.27 | 0.480 |
SN-GoMe (°) | 37.45 ± 6.33 | 38.49 ± 6.52 | 0.560 |
U1 to SN (°) | 110.99 ± 6.17 | 104.79 ± 6.46 | 0.001** |
IMPA (°) | 103.69 ± 7.00 | 99.52 ± 6.01 | 0.024* |
Interincisal angle (°) | 107.89 ± 7.54 | 117.22 ± 7.51 | 0.000*** |
Upper lip to E-line (mm) | 2.49 ± 2.11 | 2.50 ± 2.08 | 0.994 |
Lowe lip to E-line (mm) | 4.75 ± 2.17 | 5.15 ± 2.49 | 0.541 |
Nasolabial angle (°) | 96.70 ± 10.04 | 99.35 ± 11.99 | 0.385 |
Mentolabial sulcus angle (°) | 134.40 ± 11.31 | 135.95 ± 13.99 | 0.659 |
Values are presented as mean ± standard deviation.
Independent
IMPA, incisor mandibular plane angle.
*
Retraction amounts of the upper and lower incisal edges were near 7 mm in both groups, with no significant differences between the two groups (Table 4). However, there were significant between-group differences in most of the other dental variables. The U1 to SN and IMPA decreased significantly by 16.20 ± 3.64 and 18.21 ± 4.80°, respectively, in the tipping group, and 3.42 ± 4.13 and 4.50 ± 3.23°, respectively, in the translation group (
Table 4 . Comparison of the dental changes during the treatment period
Dental variable | T1 | T1−T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
U1 to SN (°) | 110.99 ± 6.17 | 104.79 ± 6.46 | 16.20 ± 3.64 | 3.42 ± 4.13 | 0.000*** | |
IMPA (°) | 103.69 ± 7.00 | 99.52 ± 6.01 | 18.21 ± 4.80 | 4.50 ± 3.23 | 0.000*** | |
Interincisal angle (°) | 107.89 ± 7.54 | 117.22 ± 7.51 | −34.53 ± 6.50 | −7.94 ± 5.11 | 0.000*** | |
Overjet (mm) | 3.74 ± 1.70 | 3.46 ± 1.67 | −0.12 ± 1.58 | −0.25 ± 1.67 | 0.775 | |
Overbite (mm) | 0.80 ± 1.86 | 1.28 ± 1.87 | −1.72 ± 1.65 | −1.11 ± 1.83 | 0.212 | |
VRP-U1e (mm) | 76.29 ± 5.67 | 75.69 ± 8.20 | 7.44 ± 1.66 | 7.06 ± 1.45 | 0.390 | |
VRP-U1c (mm) | 68.62 ± 4.81 | 69.33 ± 7.04 | 2.76 ± 1.05 | 5.73 ± 1.08 | 0.000*** | |
VRP-U1a (mm) | 64.16 ± 4.44 | 65.70 ± 6.67 | 0.33 ± 0.38 | 5.02 ± 1.32 | 0.000*** | |
VRP-L1e (mm) | 72.33 ± 6.17 | 72.65 ± 8.44 | 6.71 ± 1.18 | 7.03 ± 1.40 | 0.367 | |
VRP-L1c (mm) | 63.03 ± 6.38 | 63.69 ± 9.12 | 2.71 ± 0.88 | 5.75 ± 1.37 | 0.000*** | |
VRP-L1a (mm) | 56.94 ± 6.87 | 58.39 ± 9.66 | 0.26 ± 0.45 | 5.31 ± 1.46 | 0.000*** | |
HRP-U1e (mm) | 82.58 ± 4.90 | 84.10 ± 5.74 | −0.10 ± 1.70 | 0.89 ± 1.61 | 0.035* | |
HRP-U1c (mm) | 67.26 ± 3.94 | 67.73 ± 5.07 | 0.61 ± 1.07 | 0.36 ± 1.08 | 0.393 | |
HRP-U1a (mm) | 59.69 ± 3.66 | 59.32 ± 4.56 | 1.18 ± 1.23 | −0.08 ± 1.35 | 0.001** | |
HRP-L1e (mm) | 81.48 ± 4.86 | 82.01 ± 5.91 | 2.14 ± 1.65 | 2.04 ± 1.48 | 0.829 | |
HRP-L1c (mm) | 91.57 ± 4.69 | 92.46 ± 5.84 | 0.48 ± 1.14 | 1.73 ± 1.37 | 0.001** | |
HRP-L1a (mm) | 97.36 ± 4.90 | 98.30 ± 5.97 | −0.54 ± 1.28 | 1.48 ± 1.62 | 0.000*** |
Values are presented as mean ± standard deviation.
Independent
T1, pre-treatment; T2, post-treatment; IMPA, incisor mandibular plane angle.
*
Comparing the between-group differences in skeletal changes during the treatment period, showed were significant differences in SNB (
Table 5 . Comparison of the skeletal changes during the treatment period
Skeletal variable | T1 | T1–T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
SNA (°) | 81.42 ± 3.49 | 81.25 ± 3.38 | −0.08 ± 0.18 | 0.02 ± 0.31 | 0.161 | |
SNB (°) | 77.46 ± 3.55 | 77.21 ± 4.02 | −0.02 ± 0.35 | 0.83 ± 0.63 | 0.000*** | |
ANB difference (°) | 3.95 ± 2.19 | 4.04 ± 2.34 | −0.06 ± 0.37 | −0.81 ± 0.63 | 0.000*** | |
Wits (mm) | −0.86 ± 3.00 | −1.47 ± 3.27 | 0.60 ± 1.56 | −1.06 ± 1.81 | 0.001** | |
SN-GoMe (°) | 37.45 ± 6.33 | 38.49 ± 6.52 | 0.11 ± 0.76 | 0.02 ± 1.00 | 0.705 | |
VRP-A (mm) | 67.99 ± 4.04 | 69.49 ± 6.37 | 0.06 ± 0.37 | 0.61 ± 0.49 | 0.000*** | |
VRP-B (mm) | 59.20 ± 7.19 | 60.38 ± 9.66 | 0.05 ± 0.75 | 1.98 ± 1.18 | 0.000*** | |
VRP-Pog (mm) | 57.54 ± 8.35 | 57.93 ± 10.96 | −0.26 ± 1.09 | 0.11 ± 1.35 | 0.275 | |
HRP-A (mm) | 56.46 ± 3.53 | 56.93 ± 4.33 | 0.01 ± 0.33 | 0.03 ± 0.55 | 0.865 | |
HRP-B (mm) | 100.86 ± 5.35 | 100.54 ± 6.11 | 0.38 ± 0.90 | 0.96 ± 1.52 | 0.095 | |
HRP-Pog (mm) | 115.73 ± 6.79 | 116.60 ± 6.97 | 0.17 ± 1.01 | 0.25 ± 1.07 | 0.791 |
Values are presented as mean ± standard deviation.
Independent
T1, pre-treatment; T2, post-treatment.
**
The posterior movement of soft tissue points A and B were 0.61 ± 0.59 and 1.25 ± 1.46 mm, respectively, in the tipping group, and 1.10 ± 0.70 and 3.25 ± 1.92 mm, respectively, in the translation group, with both showing significant differences (
Table 6 . Comparison of the soft tissue changes during the treatment period
Soft tissue variable | T1 | T1–T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
VRP-Sn (mm) | 83.08 ± 4.05 | 83.58 ± 7.25 | 0.25 ± 0.29 | 0.39 ± 0.47 | 0.170 | |
VRP-A' (mm) | 81.76 ± 4.06 | 82.65 ± 7.28 | 0.61 ± 0.59 | 1.10 ± 0.70 | 0.008** | |
VRP-Ls (mm) | 85.82 ± 4.78 | 86.21 ± 8.46 | 2.59 ± 0.98 | 2.92 ± 1.29 | 0.308 | |
VRP-ULa (mm) | 87.53 ± 4.78 | 87.73 ± 8.46 | 2.62 ± 1.27 | 3.15 ± 1.42 | 0.157 | |
VRP-Stms (mm) | 80.54 ± 5.37 | 80.48 ± 8.11 | 5.25 ± 1.37 | 5.37 ± 2.16 | 0.800 | |
VRP-Stmi (mm) | 79.25 ± 5.23 | 79.46 ± 8.56 | 5.79 ± 1.56 | 6.37 ± 2.22 | 0.276 | |
VRP-LLa (mm) | 84.44 ± 5.46 | 84.77 ± 9.48 | 3.96 ± 1.27 | 5.07 ± 2.34 | 0.036* | |
VRP-Li (mm) | 79.32 ± 5.86 | 79.39 ± 9.77 | 2.81 ± 1.71 | 4.04 ± 2.10 | 0.024* | |
VRP-B' (mm) | 74.02 ± 6.25 | 74.88 ± 9.35 | 1.25 ± 1.46 | 3.25 ± 1.92 | 0.000*** | |
VRP-Pog' (mm) | 69.75 ± 8.29 | 70.03 ± 10.76 | −0.32 ± 0.92 | 0.06 ± 1.32 | 0.232 | |
HRP-Sn (mm) | 54.53 ± 3.97 | 54.99 ± 4.02 | −0.12 ± 0.51 | 0.04 ± 0.73 | 0.369 | |
HRP-A' (mm) | 56.50 ± 3.93 | 56.66 ± 4.21 | −0.11 ± 0.52 | −0.05 ± 0.45 | 0.659 | |
HRP-Ls (mm) | 68.26 ± 5.08 | 68.53 ± 5.39 | −0.83 ± 1.16 | −1.31 ± 1.37 | 0.182 | |
HRP-upper lip (mm) | 74.83 ± 4.83 | 74.64 ± 5.52 | 0.15 ± 0.80 | −0.46 ± 1.14 | 0.028* | |
HRP-Stms (mm) | 80.58 ± 4.99 | 81.30 ± 5.81 | 0.25 ± 1.50 | 0.13 ± 1.12 | 0.733 | |
HRP-Stmi (mm) | 81.23 ± 4.73 | 82.05 ± 5.62 | 0.88 ± 1.54 | 0.99 ± 1.11 | 0.764 | |
HRP-lower lip (mm) | 89.76 ± 5.63 | 90.66 ± 6.68 | 1.17 ± 2.33 | 1.00 ± 1.42 | 0.759 | |
HRP-Li (mm) | 94.82 ± 4.73 | 95.90 ± 7.11 | 1.72 ± 1.96 | 2.00 ± 1.56 | 0.567 | |
HRP-B' (mm) | 100.93 ± 5.72 | 101.32 ± 7.88 | 0.88 ± 1.48 | 2.15 ± 2.12 | 0.015* | |
HRP-Pog' (mm) | 115.74 ± 6.74 | 116.87 ± 7.14 | −0.17 ± 1.08 | 0.39 ± 1.54 | 0.133 | |
Basal upper lip thickness (mm) | 13.80 ± 1.49 | 13.29 ± 2.03 | 0.53 ± 0.55 | 0.62 ± 0.56 | 0.548 | |
Upper lip thickness (mm) | 11.11 ± 1.98 | 11.34 ± 2.34 | −2.91 ± 1.66 | −3.40 ± 1.42 | 0.253 | |
Lower lip thickness (mm) | 14.19 ± 2.29 | 14.10 ± 2.28 | −1.37 ± 1.55 | −1.63 ± 1.89 | 0.576 | |
Basal lower lip thickness (mm) | 15.23 ± 2.41 | 14.92 ± 2.10 | 1.51 ± 1.63 | 1.07 ± 1.66 | 0.339 | |
Nasolabial angle (°) | 96.70 ± 10.04 | 99.35 ± 11.99 | −9.19 ± 4.61 | −7.31 ± 5.06 | 0.164 | |
Mentolabial sulcus angle (°) | 134.40 ± 11.31 | 135.95 ± 13.99 | −5.89 ± 5.88 | 8.13 ± 6.32 | 0.000*** |
Values are presented as mean ± standard deviation.
Independent
T1, pre-treatment; T2, post-treatment.
*
In Pearson's correlation coefficients test, posterior movement of the most anterior point of the upper lip (ULa) was significantly positively correlated with the movement of the upper central incisor edge (U1e;
Table 7 . Pearson's correlation coefficients between lip profile changes and other variables
Lip profile changes | Other variables | ||
---|---|---|---|
VRP-A' | VRP-A 0.592*** | VRP-U1a 0.474*** | |
VRP-ULa | VRP-U1e 0.302* | VRP-U1a 0.280* | |
VRP-LLa | VRP-L1e 0.397** | VRP-L1a 0.387** | VRP-U1e 0.355** |
VRP-B' | VRP-B 0.692*** | VRP-L1a 0.571*** |
VRP, vertical reference plane; ULa, the most anterior point of upper lip; LLa, the most anterior point of the lower lip; U1e, upper central incisor edge; U1a, root apex of the upper central incisor; L1e, lower central incisor edge; L1a, root apex of the lower central incisor.
*
Many previous studies have examined the associated soft tissue changes, especially in the lips, after the extraction of four premolars. However, most of these studies used the conventional anchorage system rather than a maximum anchorage system, such as the skeletal anchorage system.2,13 A few previous studies reported the use of maximum anchorage systems during the retraction of anterior teeth; however, they mainly focused on the amount and not the type of retraction.1,3 In this study, we evaluated the changes in hard and soft tissues after maximum retraction of the anterior teeth depending on the type of anterior teeth retraction, tipping or translation. We found significant differences in the hard and soft tissue changes between the two groups, especially in the region near the root apex of the upper and lower incisors.
In this study, we included only patients at CVMI stage 6 to exclude the influence of growth on the soft tissue profile during treatment.14 All subjects had initial lip protrusions with more than 0.5 standard deviations above the average Korean value of lip position relative to Ricketts’ E-line,12 and there was no significant difference between the two groups. We excluded patients with > 2° of change in the mandibular plane angle during treatment to rule out vertical influence. Vertical changes, such as mandibular jaw rotation, could affect the anteroposterior relationships,15 making data interpretation difficult.
In both groups, the average retraction amounts of the upper and lower incisor edges were near 7 mm, with no significant differences. In the tipping group, the changes in U1 to SN and IMPA were 16.20 and 18.21°, respectively, and retraction amounts of the root apex of the upper and lower incisors were 0.33 and 0.26 mm, respectively, implying that controlled tipping occurred. In the translation group, the changes in U1 to SN and IMPA were 3.42 and 4.50°, respectively, and retraction amounts of the root apex of the upper and lower incisors were 5.02 and 5.31 mm, respectively, implying that a movement close to bodily translation of the anterior teeth was achieved (Table 4). In two previous studies, retraction amounts of the root apex of the upper and lower incisors were 1.20 and 1.10 mm, respectively,16 and 2.59 and 4.11 mm, respectively.3 Compared to these previous studies, much more retraction of the root apex of the incisors was observed in this study.
Horizontal changes in points A and B during treatment showed significant between-group differences (
This implies that points A and B can be changed by the root movement of the upper and lower incisors. This finding corresponds to a previous study using cone-beam computed tomography, which found that point B could be remodeled during orthodontic treatment.17 However, the amount of posterior movement by point B was significantly larger than that of point A despite almost the same retraction amount of the root apex of the upper and lower incisors. One possible explanation for this difference in the behavior of points A and B is the difference in the initial horizontal distance from the root apex of the upper incisor to point A and from the root apex of the lower incisor to point B. There was a significant difference between points A and B in the initial horizontal distance regarding initial horizontal bone thickness (
There was a significant difference in the horizontal movement of soft tissue point A and soft tissue point B between the two groups (
Different movement amounts of the soft tissue point B between the two groups also led to a significant difference in the change of the mentolabial sulcus angle. In the tipping group, the mentolabial sulcus angle increased by 5.89°. In contrast, in the translation group, the mentolabial sulcus angle decreased by 8.13°, caused by the more posterior movement of soft tissue point B. The mentolabial sulcus and the position of soft tissue point B are considered essential factors in assessing soft tissue profiles because they affect the esthetic features of both the lower lip and chin. Huang and Li18 reported that both orthodontists and laypersons consider the relative position of soft tissue point B and the mentolabial sulcus angle the most significant factors affecting facial esthetics in a study evaluating post-treatment facial esthetics after extraction of the first four premolars. They found that the formation of the mentolabial sulcus improved the evaluation of soft tissue esthetics rather than the flat sulcus. From this perspective, translational anterior teeth retraction may lead to more esthetic outcomes in some instances.
The posterior movement of ULa and LLa was mostly correlated with the horizontal movement of U1e and L1e, respectively. This finding is different from that of a previous study that showed that horizontal movement of the lower lip was mostly correlated with the horizontal movement of the incisal edge of the upper incisor.1 This different outcome is presumably due to the difference in the initial overjet value in the study sample, which was 3.60 mm in this study, in contrast to 8.17 mm in the study by Hayashida et al.,1 which should have had a greater influence on the upper incisor tip on the lower lip position.
The posterior movement of soft tissue point A was highly correlated with the movement of point A, followed by the movement of U1a. Similarly, the movement of soft tissue point B was highly correlated with the movement of point B, followed by the movement of L1a. These findings suggest that we can intentionally retract soft tissue points A and B by controlling the amount of root movement of the upper and lower incisors to induce the bone modeling of points A and B.
The findings of this study can be applied to the treatment strategies of Class III camouflage treatment. In the case of camouflage treatment of Class III patients, the retraction of the lower incisors is often included in treatment planning. However, several previous studies on Class III camouflage treatment showed that the retroclination of the lower incisors is typically accompanied during retraction, with an average degree between 6.5 and 8.1°, making a more retrusive and flat lower lip profile.19-21 Therefore, considering the results of this study, the translational retraction of the lower incisor along with the posterior movement of the root apex is recommended, especially in Class III camouflage treatment for the establishment of the esthetic lower lip contour line.
A few limitations to this study should be considered when applying these findings to clinical situations. First, the prediction of soft tissue changes after tooth movement can vary considerably depending on age, sex, dentofacial morphology, and ethnicity.5,22,23 Second, this study was designed retrospectively, and therefore, temporal soft tissue changes within the patients, such as body mass index, were not controlled.24 In addition, since the retention period was not included, there might have been some considerable post-treatment changes. These points should be considered in future studies.
Our null hypothesis was rejected because the soft tissue response was different depending on the retraction type of the anterior teeth. The more the incisor root apex is retracted, the more posterior movement is experienced by points A and B, leading to more posterior movement of the soft tissue points A and B. This movement appears to be more distinct in cases involving the lower incisor and lower lip. These results may provide guidelines for deciding upon the type of tooth movement during anterior teeth retraction according to specific soft tissue goals.
This research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0611).
No potential conflict of interest relevant to this article was reported.
Korean J Orthod 2022; 52(1): 42-52 https://doi.org/10.4041/kjod.2022.52.1.42
First Published Date January 25, 2022, Publication Date January 25, 2022
Copyright © The Korean Association of Orthodontists.
Wonkyeong Baika , Sung-Hwan Choib, Jung-Yul Chab, Hyung-Seog Yub, Kee-Joon Leeb
aDepartment of Orthodontics, Yonsei University College of Dentistry, Seoul, Korea
bDepartment of Orthodontics, Institute of Craniofacial Deformity, Yonsei University College of Dentistry, Seoul, Korea
Correspondence to:Kee-Joon Lee.
Professor, Department of Orthodontics, Institute of Craniofacial Deformity, Yonsei University College of Dentistry, 50-1 Yonsei-ro, Seodaemun-gu, Seoul 03722, Korea.
Tel +82-2-2228-3105 e-mail orthojn@yuhs.ac
This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0/) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Objective: This study compared soft tissue changes after extraction of the four premolars followed by maximum retraction of the anterior teeth according to the type of anterior teeth movement: tipping and translation. Methods: Patients who had undergone orthodontic treatment involving the extraction of four premolars were retrospectively selected and divided into either the tipping (n = 27) or translation (n = 26) groups based on the retraction of the incisor root apex and the axis changes of the incisors during the treatment period. Lateral pre- and post-treatment cephalograms were analyzed. Results: There were no significant differences between the tipping and translation groups before treatment. The retraction amounts of the root apex of the upper and lower incisors in the tipping group were 0.33 and 0.26 mm, respectively, and 5.02 and 5.31 mm, respectively, in the translation group (p < 0.001). The posterior movements of soft tissue points A and B in the tipping group were 0.61 and 1.25 mm, respectively, and 1.10 and 3.25 mm, respectively, in the translation group (p < 0.01). The mentolabial sulcus angle increased by 5.89° in the tipping group, whereas it decreased by 8.13° in the translation group (p < 0.001). Conclusions: An increased amount of retraction of the incisor root apex led to the increased posterior movement of soft tissue points A and B, and this appeared more distinct in cases involving the lower incisor and lower lip.
Keywords: Tooth movement, Soft tissue, Tipping, Translation
Esthetic improvement is one of the primary goals of orthodontic treatment. Esthetic aspects refer to the alignment of the teeth and the improvement of the facial soft tissue profile. Therefore, orthodontists prescribe force systems to move teeth, expecting that there will be corresponding soft tissue changes in response to the movement of the underlying hard tissue.1 For this reason, predicting these hard tissue-related overlying soft tissue changes is an essential consideration in treatment planning.
Retraction of the anterior teeth following premolar extraction causes changes in the anterior soft tissue profile. Previous studies have evaluated the relationship between retraction and soft tissue changes, with a particular interest in lip position.2,3 Caplan and Shivapuja4 reported that in adult patients with bimaxillary protrusions, the ratios of maxillary anterior teeth retraction to upper lip retraction and mandibular anterior teeth retraction to lower lip retraction were 1.75:1 and 1.2:1, respectively. Hayashida et al.1 reported that horizontal changes of the upper and lower lips were mostly correlated with the retraction of the upper incisor’s cervical point and the upper incisor’s tip, respectively. Other studies have found no definite correlation between changes in dentition and changes in soft tissue.5,6
Nevertheless, previous studies have focused on the tipping type of anterior tooth movement due to the known limitation regarding tooth movement against the alveolar wall. In contrast, the emergence of skeletal anchorage systems, such as miniscrews, made it possible to achieve significant anterior teeth retraction.7-9 Moreover, proper mechanics combined with miniscrews have enabled tooth movement close to bodily translations and even root movement of the incisors.10,11 However, to our knowledge, few studies have evaluated soft tissue changes according to the retraction of the incisor root apex.
This study aimed to compare the changes in hard and soft tissues after extraction of the four premolars followed by maximum retraction of the anterior teeth, depending on the type of anterior teeth movement, tipping, and translation. Our null hypothesis was that there would be no differences between the two groups regarding changes to the hard and soft tissues during treatment.
Patients presenting with lip protrusion who had undergone orthodontic treatment with extraction of four premolars followed by retraction of the anterior teeth at the Department of Orthodontics, Yonsei University Dental Hospital, Seoul, Korea, were retrospectively evaluated in this study.
The inclusion criteria were as follows: patients at cervical vertebrae maturation index (CVMI) stage 6 (cessation of growth), an initial lip protrusion with more than 0.5 standard deviations above the average value of lip position relative to Ricketts’ E-line,12 extraction of four premolars (one tooth per quadrant), > 5 mm retraction of the upper and lower incisor tips regardless of the horizontal skeletal pattern or amount of initial crowding, and the presence of pre- and post-treatment lateral cephalograms. The exclusion criteria were > 2° changes in the mandibular plane angle (Sn-GoMe) during treatment and severe craniofacial deformity.
The subjects that satisfied the inclusion and exclusion criteria were further divided into two subgroups: the tipping group with < 1 mm retraction of the upper and lower incisor root apex and more than 10° decrease in the upper and lower incisor axis (U1 to SN angle/incisor mandibular plane angle [IMPA]), and the translation group with > 3 mm retraction of the upper and lower incisor root apex and < 10° decrease in the upper and lower incisor axis. Group 1 (n = 27) contained six male and 21 female subjects, mean age of 24.89 ± 7.36 years at pre-treatment (minimum: 17 years, 8 months, maximum: 45 years, 4 months), and an average treatment time of 27.44 ± 5.46 months. Group 2 (n = 26) contained eight male and 18 female subjects, mean age of 23.92 ± 4.79 years at pre-treatment (minimum: 18 years, 3 months, maximum: 35 years, 1 month), and an average treatment time of 31.62 ± 9.33 months (Table 1).
Table 1 . Demographic features of the subjects.
Variable | Tipping group (n = 27) | Translation group (n = 26) | |
---|---|---|---|
Sex (male/female) | 6/21 | 8/18 | 0.480* |
Mean age (yr) | 24.89 ± 7.36 | 23.92 ± 4.79 | 0.580† |
Range of age | 17Y 8M–45Y 4M | 18Y 3M–35Y 1M | |
Treatment duration (mo) | 27.44 ± 5.46 | 31.62 ± 9.33 | 0.051† |
Values are presented as number only or mean ± standard deviation..
Y, year; M, month..
*χ2 test was performed..
†Independent
All patients were treated with pre-adjusted 0.018-inch slot edgewise brackets in the Roth prescription (Tomy, Tokyo, Japan). After the initial leveling and alignment, miniscrews were placed between the maxillary and mandibular second premolars and first molars for anchorage reinforcement. Then, 0.016 × 0.022-inch stainless steel rectangular archwires were placed on both arches. In Group 2 (the translation group), an additional 10° labial crown torque on the incisor area was added to the archwires if needed. Approximately 150 cN of retraction force was provided by placing elastic chains (Ormco, Glendora, CA, USA), replaced at 4-week interval until the space was closed.
This study conformed to the tenets of the Declaration of Helsinki and was approved by the Institutional Review Board of Yonsei Dental Hospital (IRB number: 2-2018-0008).
Lateral cephalograms were taken using a Cranex 3+ (Soredex, Helsinki, Finland) with a centric occlusion in the natural head position before (T1) and after (T2) treatment. Cephalometric tracing was digitized using the V-ceph program (Osstem Inc., Seoul, Korea). The horizontal reference plane (HRP) was set on the sella and oriented 7° below the sella-nasion line. The vertical reference plane (VRP) was set to the plane that passed the sella and was perpendicular to the HRP. The center of resistance of the upper and lower incisors was estimated to be one-third of the distance from the alveolar crest to the root apex in a lateral cephalogram. Cephalometric landmarks, reference planes, and measurements are shown in Table 2, Figures 1 and 2.
Table 2 . Definitions of cephalometric reference planes and measurements.
Reference planes and measurements | Definitions |
---|---|
Horizontal reference plane (HRP) | Oriented 7° below the sella-nasion line and passing through sella |
Vertical reference plane (VRP) | Perpendicular to the HRP and passing through sella |
VRP-U1e | Perpendicular distance from the VRP to upper central incisor (U1) edge |
VRP-U1c | Perpendicular distance from the VRP to center of resistance of the U1 |
VRP-U1a | Perpendicular distance from the VRP to root apex of the U1 |
VRP-L1e | Perpendicular distance from the VRP to lower central incisor (L1) edge |
VRP-L1c | Perpendicular distance from the VRP to center of resistance of the L1 |
VRP-L1a | Perpendicular distance from the VRP to root apex of the L1 |
HRP-U1e | Perpendicular distance from the HRP to U1 edge |
HRP-U1c | Perpendicular distance from the HRP to center of resistance of the U1 |
HRP-U1a | Perpendicular distance from the HRP to root apex of the U1 |
HRP-L1e | Perpendicular distance from the HRP to L1 edge |
HRP-L1c | Perpendicular distance from the HRP to center of resistance of the L1 |
HRP-L1a | Perpendicular distance from the HRP to root apex of the L1 |
VRP-A | Perpendicular distance from the VRP to A point |
VRP-B | Perpendicular distance from the VRP to B point |
VRP-Pog | Perpendicular distance from the VRP to pogonion |
HRP-A | Perpendicular distance from the HRP to A point |
HRP-B | Perpendicular distance from the HRP to B point |
HRP-Pog | Perpendicular distance from the HRP to pogonion |
VRP-Sn | Perpendicular distance from the VRP to subnasale |
VRP-A’ | Perpendicular distance from the VRP to soft tissue point A |
VRP-Ls | Perpendicular distance from the VRP to labrale superioris |
VRP-ULa | Perpendicular distance from the VRP to the most anterior point of upper lip |
VRP-Stms | Perpendicular distance from the VRP to stomion superioris |
VRP-Stmi | Perpendicular distance from the VRP to stomion inferioris |
VRP-LLa | Perpendicular distance from the VRP to the most anterior point of lower lip |
VRP-Li | Perpendicular distance from the VRP to labrale inferioris |
VRP-B’ | Perpendicular distance from the VRP to soft tissue point B |
VRP-Pog’ | Perpendicular distance from the VRP to soft tissue pogonion |
HRP-Sn | Perpendicular distance from the HRP to subnasale |
HRP-A’ | Perpendicular distance from the HRP to soft tissue point A |
HRP-Ls | Perpendicular distance from the HRP to labrale superioris |
HRP-ULa | Perpendicular distance from the HRP to the most anterior point of upper lip |
HRP-Stms | Perpendicular distance from the HRP to stomion superioris |
HRP-Stmi | Perpendicular distance from the HRP to stomion inferioris |
HRP-LLa | Perpendicular distance from the HRP to the most anterior point of lower lip |
HRP-Li | Perpendicular distance from the HRP to labrale inferioris |
HRP-B’ | Perpendicular distance from the HRP to soft tissue point B |
HRP-Pog’ | Perpendicular distance from the HRP to soft tissue pogonion |
All lateral cephalometric tracings and measurements were performed by the same investigator. One week after the first tracing, 10 samples were randomly selected and retraced. The intra-class correlation coefficients of each variable were ≥ 0.93, showing a high degree of reliability.
All statistical analyses were performed using IBM SPSS Statistics software for Windows, version 20.0 (IBM Corp., Armonk, NY, USA). Based on a preliminary study, a minimum sample size of 26 per group was required (G*power 3, Dusseldorf, Germany) at a significance level of
There were no significant differences in demographic features of the subjects between the two groups, including sex, age, and treatment duration (Table 1). There were no differences in the pre-treatment skeletal and soft tissue variables between the tipping and translation groups (Table 3). However, there were significant differences in some pre-treatment dental variables, such as the U1 to SN and interincisal angle (
Table 3 . Comparison of pre-treatment cephalometric variables between tipping and translation groups.
Variable | Tipping group (n = 27) | Translation group (n = 26) | |
---|---|---|---|
SNA (°) | 81.42 ± 3.49 | 81.25 ± 3.38 | 0.861 |
SNB (°) | 77.46 ± 3.55 | 77.21 ± 4.02 | 0.807 |
ANB difference (°) | 3.95 ± 2.19 | 4.04 ± 2.34 | 0.886 |
Wits (mm) | −0.86 ± 3.00 | −1.47 ± 3.27 | 0.480 |
SN-GoMe (°) | 37.45 ± 6.33 | 38.49 ± 6.52 | 0.560 |
U1 to SN (°) | 110.99 ± 6.17 | 104.79 ± 6.46 | 0.001** |
IMPA (°) | 103.69 ± 7.00 | 99.52 ± 6.01 | 0.024* |
Interincisal angle (°) | 107.89 ± 7.54 | 117.22 ± 7.51 | 0.000*** |
Upper lip to E-line (mm) | 2.49 ± 2.11 | 2.50 ± 2.08 | 0.994 |
Lowe lip to E-line (mm) | 4.75 ± 2.17 | 5.15 ± 2.49 | 0.541 |
Nasolabial angle (°) | 96.70 ± 10.04 | 99.35 ± 11.99 | 0.385 |
Mentolabial sulcus angle (°) | 134.40 ± 11.31 | 135.95 ± 13.99 | 0.659 |
Values are presented as mean ± standard deviation..
Independent
IMPA, incisor mandibular plane angle..
*
Retraction amounts of the upper and lower incisal edges were near 7 mm in both groups, with no significant differences between the two groups (Table 4). However, there were significant between-group differences in most of the other dental variables. The U1 to SN and IMPA decreased significantly by 16.20 ± 3.64 and 18.21 ± 4.80°, respectively, in the tipping group, and 3.42 ± 4.13 and 4.50 ± 3.23°, respectively, in the translation group (
Table 4 . Comparison of the dental changes during the treatment period.
Dental variable | T1 | T1−T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
U1 to SN (°) | 110.99 ± 6.17 | 104.79 ± 6.46 | 16.20 ± 3.64 | 3.42 ± 4.13 | 0.000*** | |
IMPA (°) | 103.69 ± 7.00 | 99.52 ± 6.01 | 18.21 ± 4.80 | 4.50 ± 3.23 | 0.000*** | |
Interincisal angle (°) | 107.89 ± 7.54 | 117.22 ± 7.51 | −34.53 ± 6.50 | −7.94 ± 5.11 | 0.000*** | |
Overjet (mm) | 3.74 ± 1.70 | 3.46 ± 1.67 | −0.12 ± 1.58 | −0.25 ± 1.67 | 0.775 | |
Overbite (mm) | 0.80 ± 1.86 | 1.28 ± 1.87 | −1.72 ± 1.65 | −1.11 ± 1.83 | 0.212 | |
VRP-U1e (mm) | 76.29 ± 5.67 | 75.69 ± 8.20 | 7.44 ± 1.66 | 7.06 ± 1.45 | 0.390 | |
VRP-U1c (mm) | 68.62 ± 4.81 | 69.33 ± 7.04 | 2.76 ± 1.05 | 5.73 ± 1.08 | 0.000*** | |
VRP-U1a (mm) | 64.16 ± 4.44 | 65.70 ± 6.67 | 0.33 ± 0.38 | 5.02 ± 1.32 | 0.000*** | |
VRP-L1e (mm) | 72.33 ± 6.17 | 72.65 ± 8.44 | 6.71 ± 1.18 | 7.03 ± 1.40 | 0.367 | |
VRP-L1c (mm) | 63.03 ± 6.38 | 63.69 ± 9.12 | 2.71 ± 0.88 | 5.75 ± 1.37 | 0.000*** | |
VRP-L1a (mm) | 56.94 ± 6.87 | 58.39 ± 9.66 | 0.26 ± 0.45 | 5.31 ± 1.46 | 0.000*** | |
HRP-U1e (mm) | 82.58 ± 4.90 | 84.10 ± 5.74 | −0.10 ± 1.70 | 0.89 ± 1.61 | 0.035* | |
HRP-U1c (mm) | 67.26 ± 3.94 | 67.73 ± 5.07 | 0.61 ± 1.07 | 0.36 ± 1.08 | 0.393 | |
HRP-U1a (mm) | 59.69 ± 3.66 | 59.32 ± 4.56 | 1.18 ± 1.23 | −0.08 ± 1.35 | 0.001** | |
HRP-L1e (mm) | 81.48 ± 4.86 | 82.01 ± 5.91 | 2.14 ± 1.65 | 2.04 ± 1.48 | 0.829 | |
HRP-L1c (mm) | 91.57 ± 4.69 | 92.46 ± 5.84 | 0.48 ± 1.14 | 1.73 ± 1.37 | 0.001** | |
HRP-L1a (mm) | 97.36 ± 4.90 | 98.30 ± 5.97 | −0.54 ± 1.28 | 1.48 ± 1.62 | 0.000*** |
Values are presented as mean ± standard deviation..
Independent
T1, pre-treatment; T2, post-treatment; IMPA, incisor mandibular plane angle..
*
Comparing the between-group differences in skeletal changes during the treatment period, showed were significant differences in SNB (
Table 5 . Comparison of the skeletal changes during the treatment period.
Skeletal variable | T1 | T1–T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
SNA (°) | 81.42 ± 3.49 | 81.25 ± 3.38 | −0.08 ± 0.18 | 0.02 ± 0.31 | 0.161 | |
SNB (°) | 77.46 ± 3.55 | 77.21 ± 4.02 | −0.02 ± 0.35 | 0.83 ± 0.63 | 0.000*** | |
ANB difference (°) | 3.95 ± 2.19 | 4.04 ± 2.34 | −0.06 ± 0.37 | −0.81 ± 0.63 | 0.000*** | |
Wits (mm) | −0.86 ± 3.00 | −1.47 ± 3.27 | 0.60 ± 1.56 | −1.06 ± 1.81 | 0.001** | |
SN-GoMe (°) | 37.45 ± 6.33 | 38.49 ± 6.52 | 0.11 ± 0.76 | 0.02 ± 1.00 | 0.705 | |
VRP-A (mm) | 67.99 ± 4.04 | 69.49 ± 6.37 | 0.06 ± 0.37 | 0.61 ± 0.49 | 0.000*** | |
VRP-B (mm) | 59.20 ± 7.19 | 60.38 ± 9.66 | 0.05 ± 0.75 | 1.98 ± 1.18 | 0.000*** | |
VRP-Pog (mm) | 57.54 ± 8.35 | 57.93 ± 10.96 | −0.26 ± 1.09 | 0.11 ± 1.35 | 0.275 | |
HRP-A (mm) | 56.46 ± 3.53 | 56.93 ± 4.33 | 0.01 ± 0.33 | 0.03 ± 0.55 | 0.865 | |
HRP-B (mm) | 100.86 ± 5.35 | 100.54 ± 6.11 | 0.38 ± 0.90 | 0.96 ± 1.52 | 0.095 | |
HRP-Pog (mm) | 115.73 ± 6.79 | 116.60 ± 6.97 | 0.17 ± 1.01 | 0.25 ± 1.07 | 0.791 |
Values are presented as mean ± standard deviation..
Independent
T1, pre-treatment; T2, post-treatment..
**
The posterior movement of soft tissue points A and B were 0.61 ± 0.59 and 1.25 ± 1.46 mm, respectively, in the tipping group, and 1.10 ± 0.70 and 3.25 ± 1.92 mm, respectively, in the translation group, with both showing significant differences (
Table 6 . Comparison of the soft tissue changes during the treatment period.
Soft tissue variable | T1 | T1–T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
VRP-Sn (mm) | 83.08 ± 4.05 | 83.58 ± 7.25 | 0.25 ± 0.29 | 0.39 ± 0.47 | 0.170 | |
VRP-A' (mm) | 81.76 ± 4.06 | 82.65 ± 7.28 | 0.61 ± 0.59 | 1.10 ± 0.70 | 0.008** | |
VRP-Ls (mm) | 85.82 ± 4.78 | 86.21 ± 8.46 | 2.59 ± 0.98 | 2.92 ± 1.29 | 0.308 | |
VRP-ULa (mm) | 87.53 ± 4.78 | 87.73 ± 8.46 | 2.62 ± 1.27 | 3.15 ± 1.42 | 0.157 | |
VRP-Stms (mm) | 80.54 ± 5.37 | 80.48 ± 8.11 | 5.25 ± 1.37 | 5.37 ± 2.16 | 0.800 | |
VRP-Stmi (mm) | 79.25 ± 5.23 | 79.46 ± 8.56 | 5.79 ± 1.56 | 6.37 ± 2.22 | 0.276 | |
VRP-LLa (mm) | 84.44 ± 5.46 | 84.77 ± 9.48 | 3.96 ± 1.27 | 5.07 ± 2.34 | 0.036* | |
VRP-Li (mm) | 79.32 ± 5.86 | 79.39 ± 9.77 | 2.81 ± 1.71 | 4.04 ± 2.10 | 0.024* | |
VRP-B' (mm) | 74.02 ± 6.25 | 74.88 ± 9.35 | 1.25 ± 1.46 | 3.25 ± 1.92 | 0.000*** | |
VRP-Pog' (mm) | 69.75 ± 8.29 | 70.03 ± 10.76 | −0.32 ± 0.92 | 0.06 ± 1.32 | 0.232 | |
HRP-Sn (mm) | 54.53 ± 3.97 | 54.99 ± 4.02 | −0.12 ± 0.51 | 0.04 ± 0.73 | 0.369 | |
HRP-A' (mm) | 56.50 ± 3.93 | 56.66 ± 4.21 | −0.11 ± 0.52 | −0.05 ± 0.45 | 0.659 | |
HRP-Ls (mm) | 68.26 ± 5.08 | 68.53 ± 5.39 | −0.83 ± 1.16 | −1.31 ± 1.37 | 0.182 | |
HRP-upper lip (mm) | 74.83 ± 4.83 | 74.64 ± 5.52 | 0.15 ± 0.80 | −0.46 ± 1.14 | 0.028* | |
HRP-Stms (mm) | 80.58 ± 4.99 | 81.30 ± 5.81 | 0.25 ± 1.50 | 0.13 ± 1.12 | 0.733 | |
HRP-Stmi (mm) | 81.23 ± 4.73 | 82.05 ± 5.62 | 0.88 ± 1.54 | 0.99 ± 1.11 | 0.764 | |
HRP-lower lip (mm) | 89.76 ± 5.63 | 90.66 ± 6.68 | 1.17 ± 2.33 | 1.00 ± 1.42 | 0.759 | |
HRP-Li (mm) | 94.82 ± 4.73 | 95.90 ± 7.11 | 1.72 ± 1.96 | 2.00 ± 1.56 | 0.567 | |
HRP-B' (mm) | 100.93 ± 5.72 | 101.32 ± 7.88 | 0.88 ± 1.48 | 2.15 ± 2.12 | 0.015* | |
HRP-Pog' (mm) | 115.74 ± 6.74 | 116.87 ± 7.14 | −0.17 ± 1.08 | 0.39 ± 1.54 | 0.133 | |
Basal upper lip thickness (mm) | 13.80 ± 1.49 | 13.29 ± 2.03 | 0.53 ± 0.55 | 0.62 ± 0.56 | 0.548 | |
Upper lip thickness (mm) | 11.11 ± 1.98 | 11.34 ± 2.34 | −2.91 ± 1.66 | −3.40 ± 1.42 | 0.253 | |
Lower lip thickness (mm) | 14.19 ± 2.29 | 14.10 ± 2.28 | −1.37 ± 1.55 | −1.63 ± 1.89 | 0.576 | |
Basal lower lip thickness (mm) | 15.23 ± 2.41 | 14.92 ± 2.10 | 1.51 ± 1.63 | 1.07 ± 1.66 | 0.339 | |
Nasolabial angle (°) | 96.70 ± 10.04 | 99.35 ± 11.99 | −9.19 ± 4.61 | −7.31 ± 5.06 | 0.164 | |
Mentolabial sulcus angle (°) | 134.40 ± 11.31 | 135.95 ± 13.99 | −5.89 ± 5.88 | 8.13 ± 6.32 | 0.000*** |
Values are presented as mean ± standard deviation..
Independent
T1, pre-treatment; T2, post-treatment..
*
In Pearson's correlation coefficients test, posterior movement of the most anterior point of the upper lip (ULa) was significantly positively correlated with the movement of the upper central incisor edge (U1e;
Table 7 . Pearson's correlation coefficients between lip profile changes and other variables.
Lip profile changes | Other variables | ||
---|---|---|---|
VRP-A' | VRP-A 0.592*** | VRP-U1a 0.474*** | |
VRP-ULa | VRP-U1e 0.302* | VRP-U1a 0.280* | |
VRP-LLa | VRP-L1e 0.397** | VRP-L1a 0.387** | VRP-U1e 0.355** |
VRP-B' | VRP-B 0.692*** | VRP-L1a 0.571*** |
VRP, vertical reference plane; ULa, the most anterior point of upper lip; LLa, the most anterior point of the lower lip; U1e, upper central incisor edge; U1a, root apex of the upper central incisor; L1e, lower central incisor edge; L1a, root apex of the lower central incisor..
*
Many previous studies have examined the associated soft tissue changes, especially in the lips, after the extraction of four premolars. However, most of these studies used the conventional anchorage system rather than a maximum anchorage system, such as the skeletal anchorage system.2,13 A few previous studies reported the use of maximum anchorage systems during the retraction of anterior teeth; however, they mainly focused on the amount and not the type of retraction.1,3 In this study, we evaluated the changes in hard and soft tissues after maximum retraction of the anterior teeth depending on the type of anterior teeth retraction, tipping or translation. We found significant differences in the hard and soft tissue changes between the two groups, especially in the region near the root apex of the upper and lower incisors.
In this study, we included only patients at CVMI stage 6 to exclude the influence of growth on the soft tissue profile during treatment.14 All subjects had initial lip protrusions with more than 0.5 standard deviations above the average Korean value of lip position relative to Ricketts’ E-line,12 and there was no significant difference between the two groups. We excluded patients with > 2° of change in the mandibular plane angle during treatment to rule out vertical influence. Vertical changes, such as mandibular jaw rotation, could affect the anteroposterior relationships,15 making data interpretation difficult.
In both groups, the average retraction amounts of the upper and lower incisor edges were near 7 mm, with no significant differences. In the tipping group, the changes in U1 to SN and IMPA were 16.20 and 18.21°, respectively, and retraction amounts of the root apex of the upper and lower incisors were 0.33 and 0.26 mm, respectively, implying that controlled tipping occurred. In the translation group, the changes in U1 to SN and IMPA were 3.42 and 4.50°, respectively, and retraction amounts of the root apex of the upper and lower incisors were 5.02 and 5.31 mm, respectively, implying that a movement close to bodily translation of the anterior teeth was achieved (Table 4). In two previous studies, retraction amounts of the root apex of the upper and lower incisors were 1.20 and 1.10 mm, respectively,16 and 2.59 and 4.11 mm, respectively.3 Compared to these previous studies, much more retraction of the root apex of the incisors was observed in this study.
Horizontal changes in points A and B during treatment showed significant between-group differences (
This implies that points A and B can be changed by the root movement of the upper and lower incisors. This finding corresponds to a previous study using cone-beam computed tomography, which found that point B could be remodeled during orthodontic treatment.17 However, the amount of posterior movement by point B was significantly larger than that of point A despite almost the same retraction amount of the root apex of the upper and lower incisors. One possible explanation for this difference in the behavior of points A and B is the difference in the initial horizontal distance from the root apex of the upper incisor to point A and from the root apex of the lower incisor to point B. There was a significant difference between points A and B in the initial horizontal distance regarding initial horizontal bone thickness (
There was a significant difference in the horizontal movement of soft tissue point A and soft tissue point B between the two groups (
Different movement amounts of the soft tissue point B between the two groups also led to a significant difference in the change of the mentolabial sulcus angle. In the tipping group, the mentolabial sulcus angle increased by 5.89°. In contrast, in the translation group, the mentolabial sulcus angle decreased by 8.13°, caused by the more posterior movement of soft tissue point B. The mentolabial sulcus and the position of soft tissue point B are considered essential factors in assessing soft tissue profiles because they affect the esthetic features of both the lower lip and chin. Huang and Li18 reported that both orthodontists and laypersons consider the relative position of soft tissue point B and the mentolabial sulcus angle the most significant factors affecting facial esthetics in a study evaluating post-treatment facial esthetics after extraction of the first four premolars. They found that the formation of the mentolabial sulcus improved the evaluation of soft tissue esthetics rather than the flat sulcus. From this perspective, translational anterior teeth retraction may lead to more esthetic outcomes in some instances.
The posterior movement of ULa and LLa was mostly correlated with the horizontal movement of U1e and L1e, respectively. This finding is different from that of a previous study that showed that horizontal movement of the lower lip was mostly correlated with the horizontal movement of the incisal edge of the upper incisor.1 This different outcome is presumably due to the difference in the initial overjet value in the study sample, which was 3.60 mm in this study, in contrast to 8.17 mm in the study by Hayashida et al.,1 which should have had a greater influence on the upper incisor tip on the lower lip position.
The posterior movement of soft tissue point A was highly correlated with the movement of point A, followed by the movement of U1a. Similarly, the movement of soft tissue point B was highly correlated with the movement of point B, followed by the movement of L1a. These findings suggest that we can intentionally retract soft tissue points A and B by controlling the amount of root movement of the upper and lower incisors to induce the bone modeling of points A and B.
The findings of this study can be applied to the treatment strategies of Class III camouflage treatment. In the case of camouflage treatment of Class III patients, the retraction of the lower incisors is often included in treatment planning. However, several previous studies on Class III camouflage treatment showed that the retroclination of the lower incisors is typically accompanied during retraction, with an average degree between 6.5 and 8.1°, making a more retrusive and flat lower lip profile.19-21 Therefore, considering the results of this study, the translational retraction of the lower incisor along with the posterior movement of the root apex is recommended, especially in Class III camouflage treatment for the establishment of the esthetic lower lip contour line.
A few limitations to this study should be considered when applying these findings to clinical situations. First, the prediction of soft tissue changes after tooth movement can vary considerably depending on age, sex, dentofacial morphology, and ethnicity.5,22,23 Second, this study was designed retrospectively, and therefore, temporal soft tissue changes within the patients, such as body mass index, were not controlled.24 In addition, since the retention period was not included, there might have been some considerable post-treatment changes. These points should be considered in future studies.
Our null hypothesis was rejected because the soft tissue response was different depending on the retraction type of the anterior teeth. The more the incisor root apex is retracted, the more posterior movement is experienced by points A and B, leading to more posterior movement of the soft tissue points A and B. This movement appears to be more distinct in cases involving the lower incisor and lower lip. These results may provide guidelines for deciding upon the type of tooth movement during anterior teeth retraction according to specific soft tissue goals.
This research was supported by a grant from the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (grant number: HI20C0611).
No potential conflict of interest relevant to this article was reported.
Table 1 . Demographic features of the subjects.
Variable | Tipping group (n = 27) | Translation group (n = 26) | |
---|---|---|---|
Sex (male/female) | 6/21 | 8/18 | 0.480* |
Mean age (yr) | 24.89 ± 7.36 | 23.92 ± 4.79 | 0.580† |
Range of age | 17Y 8M–45Y 4M | 18Y 3M–35Y 1M | |
Treatment duration (mo) | 27.44 ± 5.46 | 31.62 ± 9.33 | 0.051† |
Values are presented as number only or mean ± standard deviation..
Y, year; M, month..
*χ2 test was performed..
†Independent
Table 2 . Definitions of cephalometric reference planes and measurements.
Reference planes and measurements | Definitions |
---|---|
Horizontal reference plane (HRP) | Oriented 7° below the sella-nasion line and passing through sella |
Vertical reference plane (VRP) | Perpendicular to the HRP and passing through sella |
VRP-U1e | Perpendicular distance from the VRP to upper central incisor (U1) edge |
VRP-U1c | Perpendicular distance from the VRP to center of resistance of the U1 |
VRP-U1a | Perpendicular distance from the VRP to root apex of the U1 |
VRP-L1e | Perpendicular distance from the VRP to lower central incisor (L1) edge |
VRP-L1c | Perpendicular distance from the VRP to center of resistance of the L1 |
VRP-L1a | Perpendicular distance from the VRP to root apex of the L1 |
HRP-U1e | Perpendicular distance from the HRP to U1 edge |
HRP-U1c | Perpendicular distance from the HRP to center of resistance of the U1 |
HRP-U1a | Perpendicular distance from the HRP to root apex of the U1 |
HRP-L1e | Perpendicular distance from the HRP to L1 edge |
HRP-L1c | Perpendicular distance from the HRP to center of resistance of the L1 |
HRP-L1a | Perpendicular distance from the HRP to root apex of the L1 |
VRP-A | Perpendicular distance from the VRP to A point |
VRP-B | Perpendicular distance from the VRP to B point |
VRP-Pog | Perpendicular distance from the VRP to pogonion |
HRP-A | Perpendicular distance from the HRP to A point |
HRP-B | Perpendicular distance from the HRP to B point |
HRP-Pog | Perpendicular distance from the HRP to pogonion |
VRP-Sn | Perpendicular distance from the VRP to subnasale |
VRP-A’ | Perpendicular distance from the VRP to soft tissue point A |
VRP-Ls | Perpendicular distance from the VRP to labrale superioris |
VRP-ULa | Perpendicular distance from the VRP to the most anterior point of upper lip |
VRP-Stms | Perpendicular distance from the VRP to stomion superioris |
VRP-Stmi | Perpendicular distance from the VRP to stomion inferioris |
VRP-LLa | Perpendicular distance from the VRP to the most anterior point of lower lip |
VRP-Li | Perpendicular distance from the VRP to labrale inferioris |
VRP-B’ | Perpendicular distance from the VRP to soft tissue point B |
VRP-Pog’ | Perpendicular distance from the VRP to soft tissue pogonion |
HRP-Sn | Perpendicular distance from the HRP to subnasale |
HRP-A’ | Perpendicular distance from the HRP to soft tissue point A |
HRP-Ls | Perpendicular distance from the HRP to labrale superioris |
HRP-ULa | Perpendicular distance from the HRP to the most anterior point of upper lip |
HRP-Stms | Perpendicular distance from the HRP to stomion superioris |
HRP-Stmi | Perpendicular distance from the HRP to stomion inferioris |
HRP-LLa | Perpendicular distance from the HRP to the most anterior point of lower lip |
HRP-Li | Perpendicular distance from the HRP to labrale inferioris |
HRP-B’ | Perpendicular distance from the HRP to soft tissue point B |
HRP-Pog’ | Perpendicular distance from the HRP to soft tissue pogonion |
Table 3 . Comparison of pre-treatment cephalometric variables between tipping and translation groups.
Variable | Tipping group (n = 27) | Translation group (n = 26) | |
---|---|---|---|
SNA (°) | 81.42 ± 3.49 | 81.25 ± 3.38 | 0.861 |
SNB (°) | 77.46 ± 3.55 | 77.21 ± 4.02 | 0.807 |
ANB difference (°) | 3.95 ± 2.19 | 4.04 ± 2.34 | 0.886 |
Wits (mm) | −0.86 ± 3.00 | −1.47 ± 3.27 | 0.480 |
SN-GoMe (°) | 37.45 ± 6.33 | 38.49 ± 6.52 | 0.560 |
U1 to SN (°) | 110.99 ± 6.17 | 104.79 ± 6.46 | 0.001** |
IMPA (°) | 103.69 ± 7.00 | 99.52 ± 6.01 | 0.024* |
Interincisal angle (°) | 107.89 ± 7.54 | 117.22 ± 7.51 | 0.000*** |
Upper lip to E-line (mm) | 2.49 ± 2.11 | 2.50 ± 2.08 | 0.994 |
Lowe lip to E-line (mm) | 4.75 ± 2.17 | 5.15 ± 2.49 | 0.541 |
Nasolabial angle (°) | 96.70 ± 10.04 | 99.35 ± 11.99 | 0.385 |
Mentolabial sulcus angle (°) | 134.40 ± 11.31 | 135.95 ± 13.99 | 0.659 |
Values are presented as mean ± standard deviation..
Independent
IMPA, incisor mandibular plane angle..
*
Table 4 . Comparison of the dental changes during the treatment period.
Dental variable | T1 | T1−T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
U1 to SN (°) | 110.99 ± 6.17 | 104.79 ± 6.46 | 16.20 ± 3.64 | 3.42 ± 4.13 | 0.000*** | |
IMPA (°) | 103.69 ± 7.00 | 99.52 ± 6.01 | 18.21 ± 4.80 | 4.50 ± 3.23 | 0.000*** | |
Interincisal angle (°) | 107.89 ± 7.54 | 117.22 ± 7.51 | −34.53 ± 6.50 | −7.94 ± 5.11 | 0.000*** | |
Overjet (mm) | 3.74 ± 1.70 | 3.46 ± 1.67 | −0.12 ± 1.58 | −0.25 ± 1.67 | 0.775 | |
Overbite (mm) | 0.80 ± 1.86 | 1.28 ± 1.87 | −1.72 ± 1.65 | −1.11 ± 1.83 | 0.212 | |
VRP-U1e (mm) | 76.29 ± 5.67 | 75.69 ± 8.20 | 7.44 ± 1.66 | 7.06 ± 1.45 | 0.390 | |
VRP-U1c (mm) | 68.62 ± 4.81 | 69.33 ± 7.04 | 2.76 ± 1.05 | 5.73 ± 1.08 | 0.000*** | |
VRP-U1a (mm) | 64.16 ± 4.44 | 65.70 ± 6.67 | 0.33 ± 0.38 | 5.02 ± 1.32 | 0.000*** | |
VRP-L1e (mm) | 72.33 ± 6.17 | 72.65 ± 8.44 | 6.71 ± 1.18 | 7.03 ± 1.40 | 0.367 | |
VRP-L1c (mm) | 63.03 ± 6.38 | 63.69 ± 9.12 | 2.71 ± 0.88 | 5.75 ± 1.37 | 0.000*** | |
VRP-L1a (mm) | 56.94 ± 6.87 | 58.39 ± 9.66 | 0.26 ± 0.45 | 5.31 ± 1.46 | 0.000*** | |
HRP-U1e (mm) | 82.58 ± 4.90 | 84.10 ± 5.74 | −0.10 ± 1.70 | 0.89 ± 1.61 | 0.035* | |
HRP-U1c (mm) | 67.26 ± 3.94 | 67.73 ± 5.07 | 0.61 ± 1.07 | 0.36 ± 1.08 | 0.393 | |
HRP-U1a (mm) | 59.69 ± 3.66 | 59.32 ± 4.56 | 1.18 ± 1.23 | −0.08 ± 1.35 | 0.001** | |
HRP-L1e (mm) | 81.48 ± 4.86 | 82.01 ± 5.91 | 2.14 ± 1.65 | 2.04 ± 1.48 | 0.829 | |
HRP-L1c (mm) | 91.57 ± 4.69 | 92.46 ± 5.84 | 0.48 ± 1.14 | 1.73 ± 1.37 | 0.001** | |
HRP-L1a (mm) | 97.36 ± 4.90 | 98.30 ± 5.97 | −0.54 ± 1.28 | 1.48 ± 1.62 | 0.000*** |
Values are presented as mean ± standard deviation..
Independent
T1, pre-treatment; T2, post-treatment; IMPA, incisor mandibular plane angle..
*
Table 5 . Comparison of the skeletal changes during the treatment period.
Skeletal variable | T1 | T1–T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
SNA (°) | 81.42 ± 3.49 | 81.25 ± 3.38 | −0.08 ± 0.18 | 0.02 ± 0.31 | 0.161 | |
SNB (°) | 77.46 ± 3.55 | 77.21 ± 4.02 | −0.02 ± 0.35 | 0.83 ± 0.63 | 0.000*** | |
ANB difference (°) | 3.95 ± 2.19 | 4.04 ± 2.34 | −0.06 ± 0.37 | −0.81 ± 0.63 | 0.000*** | |
Wits (mm) | −0.86 ± 3.00 | −1.47 ± 3.27 | 0.60 ± 1.56 | −1.06 ± 1.81 | 0.001** | |
SN-GoMe (°) | 37.45 ± 6.33 | 38.49 ± 6.52 | 0.11 ± 0.76 | 0.02 ± 1.00 | 0.705 | |
VRP-A (mm) | 67.99 ± 4.04 | 69.49 ± 6.37 | 0.06 ± 0.37 | 0.61 ± 0.49 | 0.000*** | |
VRP-B (mm) | 59.20 ± 7.19 | 60.38 ± 9.66 | 0.05 ± 0.75 | 1.98 ± 1.18 | 0.000*** | |
VRP-Pog (mm) | 57.54 ± 8.35 | 57.93 ± 10.96 | −0.26 ± 1.09 | 0.11 ± 1.35 | 0.275 | |
HRP-A (mm) | 56.46 ± 3.53 | 56.93 ± 4.33 | 0.01 ± 0.33 | 0.03 ± 0.55 | 0.865 | |
HRP-B (mm) | 100.86 ± 5.35 | 100.54 ± 6.11 | 0.38 ± 0.90 | 0.96 ± 1.52 | 0.095 | |
HRP-Pog (mm) | 115.73 ± 6.79 | 116.60 ± 6.97 | 0.17 ± 1.01 | 0.25 ± 1.07 | 0.791 |
Values are presented as mean ± standard deviation..
Independent
T1, pre-treatment; T2, post-treatment..
**
Table 6 . Comparison of the soft tissue changes during the treatment period.
Soft tissue variable | T1 | T1–T2 | ||||
---|---|---|---|---|---|---|
Tipping group (n = 27) | Translation group (n = 26) | Tipping group (n = 27) | Translation group (n = 26) | |||
VRP-Sn (mm) | 83.08 ± 4.05 | 83.58 ± 7.25 | 0.25 ± 0.29 | 0.39 ± 0.47 | 0.170 | |
VRP-A' (mm) | 81.76 ± 4.06 | 82.65 ± 7.28 | 0.61 ± 0.59 | 1.10 ± 0.70 | 0.008** | |
VRP-Ls (mm) | 85.82 ± 4.78 | 86.21 ± 8.46 | 2.59 ± 0.98 | 2.92 ± 1.29 | 0.308 | |
VRP-ULa (mm) | 87.53 ± 4.78 | 87.73 ± 8.46 | 2.62 ± 1.27 | 3.15 ± 1.42 | 0.157 | |
VRP-Stms (mm) | 80.54 ± 5.37 | 80.48 ± 8.11 | 5.25 ± 1.37 | 5.37 ± 2.16 | 0.800 | |
VRP-Stmi (mm) | 79.25 ± 5.23 | 79.46 ± 8.56 | 5.79 ± 1.56 | 6.37 ± 2.22 | 0.276 | |
VRP-LLa (mm) | 84.44 ± 5.46 | 84.77 ± 9.48 | 3.96 ± 1.27 | 5.07 ± 2.34 | 0.036* | |
VRP-Li (mm) | 79.32 ± 5.86 | 79.39 ± 9.77 | 2.81 ± 1.71 | 4.04 ± 2.10 | 0.024* | |
VRP-B' (mm) | 74.02 ± 6.25 | 74.88 ± 9.35 | 1.25 ± 1.46 | 3.25 ± 1.92 | 0.000*** | |
VRP-Pog' (mm) | 69.75 ± 8.29 | 70.03 ± 10.76 | −0.32 ± 0.92 | 0.06 ± 1.32 | 0.232 | |
HRP-Sn (mm) | 54.53 ± 3.97 | 54.99 ± 4.02 | −0.12 ± 0.51 | 0.04 ± 0.73 | 0.369 | |
HRP-A' (mm) | 56.50 ± 3.93 | 56.66 ± 4.21 | −0.11 ± 0.52 | −0.05 ± 0.45 | 0.659 | |
HRP-Ls (mm) | 68.26 ± 5.08 | 68.53 ± 5.39 | −0.83 ± 1.16 | −1.31 ± 1.37 | 0.182 | |
HRP-upper lip (mm) | 74.83 ± 4.83 | 74.64 ± 5.52 | 0.15 ± 0.80 | −0.46 ± 1.14 | 0.028* | |
HRP-Stms (mm) | 80.58 ± 4.99 | 81.30 ± 5.81 | 0.25 ± 1.50 | 0.13 ± 1.12 | 0.733 | |
HRP-Stmi (mm) | 81.23 ± 4.73 | 82.05 ± 5.62 | 0.88 ± 1.54 | 0.99 ± 1.11 | 0.764 | |
HRP-lower lip (mm) | 89.76 ± 5.63 | 90.66 ± 6.68 | 1.17 ± 2.33 | 1.00 ± 1.42 | 0.759 | |
HRP-Li (mm) | 94.82 ± 4.73 | 95.90 ± 7.11 | 1.72 ± 1.96 | 2.00 ± 1.56 | 0.567 | |
HRP-B' (mm) | 100.93 ± 5.72 | 101.32 ± 7.88 | 0.88 ± 1.48 | 2.15 ± 2.12 | 0.015* | |
HRP-Pog' (mm) | 115.74 ± 6.74 | 116.87 ± 7.14 | −0.17 ± 1.08 | 0.39 ± 1.54 | 0.133 | |
Basal upper lip thickness (mm) | 13.80 ± 1.49 | 13.29 ± 2.03 | 0.53 ± 0.55 | 0.62 ± 0.56 | 0.548 | |
Upper lip thickness (mm) | 11.11 ± 1.98 | 11.34 ± 2.34 | −2.91 ± 1.66 | −3.40 ± 1.42 | 0.253 | |
Lower lip thickness (mm) | 14.19 ± 2.29 | 14.10 ± 2.28 | −1.37 ± 1.55 | −1.63 ± 1.89 | 0.576 | |
Basal lower lip thickness (mm) | 15.23 ± 2.41 | 14.92 ± 2.10 | 1.51 ± 1.63 | 1.07 ± 1.66 | 0.339 | |
Nasolabial angle (°) | 96.70 ± 10.04 | 99.35 ± 11.99 | −9.19 ± 4.61 | −7.31 ± 5.06 | 0.164 | |
Mentolabial sulcus angle (°) | 134.40 ± 11.31 | 135.95 ± 13.99 | −5.89 ± 5.88 | 8.13 ± 6.32 | 0.000*** |
Values are presented as mean ± standard deviation..
Independent
T1, pre-treatment; T2, post-treatment..
*
Table 7 . Pearson's correlation coefficients between lip profile changes and other variables.
Lip profile changes | Other variables | ||
---|---|---|---|
VRP-A' | VRP-A 0.592*** | VRP-U1a 0.474*** | |
VRP-ULa | VRP-U1e 0.302* | VRP-U1a 0.280* | |
VRP-LLa | VRP-L1e 0.397** | VRP-L1a 0.387** | VRP-U1e 0.355** |
VRP-B' | VRP-B 0.692*** | VRP-L1a 0.571*** |
VRP, vertical reference plane; ULa, the most anterior point of upper lip; LLa, the most anterior point of the lower lip; U1e, upper central incisor edge; U1a, root apex of the upper central incisor; L1e, lower central incisor edge; L1a, root apex of the lower central incisor..
*